Changing The Filter - Jura IMPRESSA Z5 Manual

Changing the filter

Changing the filter
Change following a prompt Change following a prompt
Precondition:
COFFEE READY
T
Place a receptacle under the coffee spout.
k T Keep the Rotary Switch pressed until
appears.
k T Press the Rotary Switch to enter the programme item.
CAPPUCCINO CLEANING
g T Turn the Rotary Switch until
appears.
k T Press the Rotary Switch to initiate the rinse operation.
RINSING
Rinsing stops automatically and your IMPRESSA is then
ready for use.
E
After 50 litres of water have flowed through the filter, or after
two months, its capacity is reached. Your IMPRESSA will auto-
matically prompt you to change the filter.
E
If the CLARIS plus filter cartridge is not activated, you will not
be prompted to change the filter.
@ You can also try out 'changing the filter' online. Visit the
Knowledge Builder at www.jura.com.
To change the CLARIS plus filter cartridge when prompted to do so
by your IMPRESSA, proceed as follows:
Precondition:
COFFEE READY
played and the maintenance button c lights up.
c T Press the maintenance button.
CHANGE TIME 2 MIN
E
If you want to change the filter at a later point in time, turn the
Rotary Switch until
the maintenance programme by pressing the Rotary Switch.
The prompt 'change filter' remains on the display.
is shown on the display.
MACHINE RINSING
/
FILTER CHANGE
/
START YES
/
CHANGE START NO
7 Maintenance
MAINTENANCE
is dis-
is displayed. Exit
61