Permanent Settings In Programming Mode - Jura IMPRESSA Z5 Manual

Permanent settings in Permanent settings in
programming mode programming mode
Programme item
MAINTENANCE
PRODUCTS
FILTER
I.P.W.S.
u T Press and hold the Ristretto button.
1 RISTRETTO
u T Hold the Ristretto button down until
BUTTON
u T Release the Ristretto button.
Coffee preparation starts and the ristretto flows into the
cup.
T
Press any button as soon as enough ristretto has flowed into
the cup.
Preparation stops automatically.
briefly on the display. The set amount of water for a ristretto
is saved as a permanent value.
on the display.
E
You can alter these settings at any time by repeating the
above procedure.
You can easily adjust your IMPRESSA to your personal coffee blends
and specialities. Simply by turning and pressing the Rotary Switch,
you can navigate through the easy-to-understand program steps
and make permanent settings.
You can make the following settings with the Rotary Switch:
Subitem
CAPPUCCINO
,
CLEANING
FILTER CHANGE
MACHINE CLEAN
CAPPUCCINO
,
RINSING
MACHINE DESCALE
MACHINE RINSE
SELECT PRODUCT
YES
NO
3 Familiarising yourself with the control options
and the coffee strength is displayed.
appears.
Explanation
T
Select the desired maintenance programme.
If no action is taken, programming
,
mode is exited automatically after approx.
,
five seconds.
,
T
Select your settings for the coffee and milk
specialities and hot water.
T
Indicate whether you operate your
IMPRESSA with or without a CLARIS plus filter
cartridge.
/
ENOUGH? PRESS
CONFIRMED √
is shown
COFFEE READY
appears
29