Ap Group Configuration Worksheet; Setting Descriptions; Blank Template - Philips IntelliVue Telemetry System Infrastructure Installation And Service Manual

AP Group Configuration Worksheet

For each AP Group to be established, complete a separate worksheet. The template
Setting
Descriptions for this form is provided on the Documentation CD-ROM. See "Planning Your AP
Groupings" on page 2-17 for information about AP groups and how you may want to
configure them. Use the information you record in this worksheet with the
procedure entitled "Configuring AP Groups" on page 3-28.
Group Level Settings:
Document the following settings for each AP group:
• AP Group Name - Name of the AP Group
• AP Group Type - Always Smart-hopping
• AP Group Description - Optional notes regarding this AP Group
• Partnered APC - Copy APC Name from APC Configuration Worksheet for the APC
that will be associated with Access Points in this group.
• Alert Destination - IP Address of Database Server/IIC receiving alerts for this
group of APs.
AP Group Members:
Document the following settings for each AP group:
• AP MAC Address - MAC Address as labeled on the Access Point
• AP Name - Name to be assigned to this AP within the system.
• AP Specific IP Address - Specific IP address to be assigned to this AP. This IP
address needs to be the same as the IP address assigned in the Database
Server in order for statistics gathering to occur for this AP.
Group Level Parameters

Blank Template

Setting
AP Group Name
AP Group Type
AP Group Description/
Area Covered (optional)
Partnered APC
Alert Destination
(DBS IP Address)
IntelliVue Telemetry System Infrastructure Installation and Service Guide
Rules
Enter APC Name from AP
Configuration Worksheet.
Completing ITS Installation Worksheets
Value
Smart-hopping
2-35