Radio Compliance Specifications; Safety Regulatory Compliance - Philips IntelliVue Telemetry System Infrastructure Installation And Service Manual

Chapter 1: Overview

Radio Compliance Specifications

FCC Specification
47CFR 95, sub-part H,
WMTS Services
47CFR 15, sub-part C
47CFR 15, sub-part B,
Unintentional
Radiators
47CFR 15, sub-part A,
General

Safety Regulatory Compliance

Information Technology Equipment - Safety
IEC 60950-1:2001
(1st Edition)
UL 2043: 2003
U.S. National Electrical Code
NFPA 70:2002,
Paragraph 300.22, Subpart C
Standard for Uninterruptible Power Supply
Equipment
UL 1778:First Edition, 23-Nov-92 with revisions
dated 6-Dec-93, 4-Feb-94, 19-Jul-94
1-26
Table 1-14: 1.4 GHz ITS FCC Compliance Specifications
Relevant
Paragraphs
95.1115,
95.1125,
95.1109
15.203
15.101,
15.105,
15.107, 15.109
15.19
15.31, e)
15.33, 1)
15.35, c)
Table 1-15: ITS Infrastructure Safety Standard Compliance
Safety Specification
Content
Field strength limits,
Undesired emissions
Emission types, Channel use,
Frequency stability, Labeling
Antenna requirement
General labeling & user
information Conducted &
Radiated limits
Required labeling,
Allowed RF power variation,
Allowed RF harmonic
radiation, RF power
measurement is averaged
over one complete pulse
train for pulsed operation
Compliant ITS Device/Component
Standard and Core Access Points, APC, and
Sync Unit, PoE Unit, Switches, Routers, UPS.
1.4 GHz Core APs and Remote Antennas
installed in air-handling spaces.
Standard 1.4 GHz and 2.4 GHz Access
Points installed in air-handling spaces
comply when installed within a compliant
enclosure available from Philips.
"Air-handling spaces" include the areas
above dropped ceilings. These spaces are
not to be confused with "plenum," which
refers to air ducts. ITS APs are not mounted
in plenum space.
UPS.
Device
Patient-worn
Transceiver,
Standard and Core
Access Point
powered by POE
Unit.
Standard and Core
Access Point
Sync Unit, PoE Unit,
and APC
Sync Unit, PoE Unit,
and APC