Table of Contents
Advertisement
Replacing fuse
1. Remove the fuse holder on the back
of this unit using a screw driver.
The presenter does
not respond to the
remote control.
Head lamp does
not light up as
soon as the LAMP
button is pressed.
2. Remove the blown fuse and
3. Replace the fuse holder.
• Check the batteries in the remote
control. If they are used up, replace
with new ones. See page 6 to install
the batteries.
• Remove the batteries from the remote
control if it will not be used for a month
or more. This will help prevent possible
damage from battery leakage. If
leakage occurs, wipe up the liquid
inside the compartment and replace
the batteries with new ones.
• Built-in protection circuitry is activated
to protect the lamp circuit. It's normal.
replace it with a spare one.
Spare
Fuse in use
27
Advertisement
Table of Contents
