Table of Contents
Advertisement
Using the presenter
If you want to
rotate the
image
displayed, use
this switch to
adjust the lens
position.
16
To project an object on the video presenter
Set up your video
presenter properly.
(see page 8 and 9.)
Connect to a TV or monitor to display the image.
(see page 10.)
Turn the power of the output device and the video presenter on.
POWER
POWER
Place the object on the lightbox, and adjust the head to face
the object.
Continued
ZOOM
IRIS
If there is no image on the TV
or monitor, check if the cable
is properly connected, and
press the INT/EXT button of
the presenter to select the
input mode to INT OUT.
To adjust the
height to put the
lens closer to the
document, lower
the arm while
you hold down
the arm lock
button.
Advertisement
Table of Contents
