Table of Contents
Advertisement
18
Focus on the object.
• In most situations, it is better to use the automatic focus feature. Use AF
button for automatic focusing.
• In some conditions, however, automatic focusing may be inadequate. Then
you must focus manually. Press FOCUS F (FAR) button or FOCUS N (NEAR)
button on the remote control to focus on object being far away or on object
being close to the camera lens.
INT/EXT
LAMP
AWC
AF
AF
NEGA/POSI
FREEZE
Auto focusing is not work properly when you try to focus on objects
in conditions below.
In this case, adjust the focusing manually.
Object being too far away or too close to focus on. The automatic
focusable distance with the adapter lens attached is within 24 and
32 cm. Without the adapter lens, the range is 80 cm to ¡ Ä ¡ Ä . .
¦ U ¦ U Object in a dark area.
¦ U ¦ U The background is too bright.
¦ U ¦ U Image containing several objects at the same time; some objects
being close to the lens of this unit and others being far away.
¦ U ¦ U Very shiny or glassy surface
¦ U ¦ U Repetitive horizontal or vertical lines
¦ U ¦ U Object reflecting a strong beam.
You see the image on the TV or
monitor.
• To use versatile image control features,
see pages 20 through 22.
For SVP-5500DX, to change the object projected during presentation,
freeze the image on the screen using FREEZE button of the presenter then
change it. To cancel the freezing, press EXT button on the remote control.
INT/EXT
LAMP
AWC
AF
NEGA/POSI
FREEZE
FREEZE
Advertisement
Table of Contents
