Change The Parameter Setting Value - Mitsubishi Electric FR-A700 Instruction Manual

3.2.7

Change the parameter setting value

Changing example Change the Pr. 1 Maximum frequency .
1.
Screen at powering on
The monitor display appears.
2.
Press to choose the PU operation
mode.
3.
Press
setting mode.
4.
5.
Press to read the currently set value.
" "(initial value) appears.
6.
Turn to change it to the set
value "
7.
Press to set.
to
appears. ...... Write disable error
appears. ...... Write error during operation
appears. ...... Calibration error
appears. ...... Mode designation error
For details refer to page 131.
REMARKS
The number of digits displayed on the operation panel (FR-DU07) is four.
If the values to be displayed have five digits or more including decimal places, the fifth or later numerals can not be displayed nor
set.
(Example) When Pr. 1
When 60Hz is set, 60.00 is displayed.
When 120Hz is set, 120.0 is displayed and second decimal place is not displayed nor set.
Operation
to choose the parameter
Pr. 1) appears.
".
· By turning , you can read another parameter.
· Press to show the setting again.
· Press twice to show the next parameter.
· Press twice to return the monitor to frequency monitor.
are displayed ... Why?
Operation panel (FR-DU07)
Display
PU indication is lit.
The parameter
number read
previously appears.
Flicker ··· Parameter setting complete!!
3
43