Communication Operation; Usb Connector - Mitsubishi Electric FR-A700 Instruction Manual

2.4.10 Communication operation

Using the PU connector or RS-485 terminal, you can
perform communication operation from a personal
computer etc. When the PU connector is connected
with a personal, FA or other computer by a
communication cable, a user program can run and
monitor the inverter or read and write to parameters.
For the Mitsubishi inverter protocol (computer link
operation), communication can be performed with the
PU connector and RS-485 terminal.
For the Modbus RTU protocol, communication can be
performed with the RS-485 terminal.
For further details, refer to section 4 of
Manual (applied).

2.4.11 USB connector

A personal computer and an inverter can be connected with a USB (Ver1. 1) cable.
You can perform parameter setting and monitoring with the FR-Configurator.
• USB communication specifications
Interfase
Transmission speed
Wiring length
Connector
Power supply
Removal of cover
Place a flat-blade screwdriver,
etc. in a slot and push up the
cover to open.
Instruction
Conforms to USB1.1
12Mbps
Maximum 5m
USB B connector (B receptacle)
Self-power supply
PLC
Inverter Inverter
USB connector
USB cable
Wiring
Multidrop link
Inverter
(32 inverters maximum
are connectable)
27
2