Temperature Selector; Sensors - Miele H 5740 BP Operating And Installation Instructions

Temperature selector

The right-hand control V 6 W
– is used to set the required temperature.
– is used to enter times (alternative to the V or W sensors).
It can be turned clockwise or anti-clockwise.
The temperature selector can be retracted in any position.
Turning clockwise increases values and turning anti-clockwise decreases them.

Sensors

The sensors underneath the display react to touch.
A keypad tone will sound each time a sensor is touched. You can switch off the
keypad tone (see "Settings %").
Use
OK – For calling up the functions in the display. The triangle V will appear in
the display.
– For confirming an entry.
V – For moving the triangle V in the display to left or the right.
– For increasing or decreasing time entries.
W
– For selecting the appliance setting P and changing the status S.
N
For entering a minute minder time, e.g. for boiling eggs.
The time will change each time the V or W is touched:
– Duration T and Finish time S in increments of a minute.
– The Minute minder time N at first in increments of 5 seconds and then in
increments of a minute.
Touching the sensor for longer speeds up the change in the display.
Controls
17