Important Safety Instructions - Miele G 7883 Operating And Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

This machine conforms to current
safety requirements. However,
inappropriate use can lead to
personal injury and property
damage.
To avoid the risk of accidents and
machine damage read the operating
instructions carefully before using
this machine.
Keep these instructions in a safe
place and pass them on to any
future user.
WARNING - To reduce the risk of fire,
electric shock or injury:
Use
~
This lab washer is not intended for
any purpose that is not indicated in the
operating instructions. Conversions,
modifications, and other unintended
uses are considered to be dangerous.
The cleaning processes described here
apply only to those medical products
that are specifically designed by the
manufacturer to be re-used. Follow the
product manufacturer's instructions.
~
This lab washer in intended for
indoor stationary use only.
4
Please pay attention to the following
notes to maintain safe procedures.
~
The lab washer should be installed,
commissioned and maintained only by
a Miele Service Technician. Repairs by
unqualified persons could be
dangerous.
~
Do not install the lab washer in an
area where a danger of explosion or
freezing may be present.
~
Be certain this appliance is properly
installed and grounded by an
authorized technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system
checked by a qualified technician.
~
A damaged or leaking lab washer is
dangerous. Turn off the machine
immediately at the main switch and call
the Miele Service Department.
~
Personnel operating the lab washer
should be trained regularly. Children
and untrained personnel must not be
allowed access to the machine or its
controls.
~
Take care when handling
processing chemicals (detergents,
softeners, neutralizers, etc.). These may
contain irritant or corrosive ingredients.
Wear protective gloves and goggles.
With all chemical agents the
manufacturer's safety conditions must
be observed.