Wire Harness Set (14B-F2590-70) - Yamaha YZF-R1 Service Manual

33. Wire Harness Set (14B-F2590-70)

Parts List
No. PART No.
1 14B-82590-70
* 2 5GF-83976-00
3 14B-83976-70
4 2C0-82509-70
5 4C8-82188-70
6 14B-2128A-70
* 7 90480-13003
* 8 90560-06201
* 9 90111-06051
10 14B-2161F-70
11 14B-2161E-70
* 12 90480-12237
* 13 90387-06023
* 14 90338-06018
* 15 120-82131-00
* 16 90110-06172
* 17 92902-06200
* 18 90110-06219
This wire harness is weight-saved by doing away with connecting wires for lights.
NOTICE
x Remove the coupler of the main switch before starting assembling work.
x Do not remove the AC generator but leave it to function. Use on the battery alone will
make the machine unable to run in a short time.
x The wire harness will not function if it is not assembled with the ECU (14B-8591A-70,
71, 72) of the kit.
TIP
x If the wire harness is installed from the kit, the STD D-MODE (drive mode) will not
function.
x If the E-SD (STD steering damper) is not used, removing its coupler will pose no
problem.
PART NAME
WIRE HARNESS ASSY.
SW., HANDLE 1
SW., HANDLE 1
WIRE, SUB-LEAD
RESISTOR ASSY.
BRKT., REGULATOR 1
GROMMET
SPACER
BOLT, HEX. SOCKET BUTTON
BRKT., 5
BRKT., 4
GROMMET
COLLAR
PLUG
BAND, BATTERY
BOLT, HEX. SOCKET
WASHER, PLAIN
BOLT, HEX. SOCKET
– 60 –
Q'TY REMARKS
1
1 PIT ROAD LIMITER
1 Map select
1
1 Finished with joint in
Wire Harness.
1
2
2
2
1
1
4
4
3
1
3
3
4