Panasonic KX-NCP500 Networking Manual page 52

4.5.1 Assigning the IP Addressing Information
KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To enter the IP address of the MPR card (PBX IP Address)
Select "PBX".
ENTER
To enter the IP address of the Secondary PBX (optional for software version 2.00 or
later only)
Select "Secondary PBX".
To set VLAN parameters
To the VLAN settings
OR
To end programming
STORE
Press "STORE".
52 IP Networking Guide
Press "SETUP"
when it is displayed.
Software version 2.00 or later only
ENTER Select "PBX IP Address".
PBX IP Address
ENTER
The IP-PT will reboot
and can then be
registered to the PBX.
SETUP
ENTER
ENTER
PBX IP Address
Select "Primary PBX".
ENTER
Document Version 2010-08