Table of Contents
Advertisement
NETWORK SET SETTING
Main menu 2
<MAIN MENU 2>
1.DISPLAY SET/VIDEO LOSS SET ->
2.RS-232C/RS-485 SET
->
3.BUZZER SET
->
4.SECURITY LOCK SET
->
5.NETWORK SET
->
6.HDD SET
->
7.POWER FAILURE/USED TIME
->
TO MAIN MENU 1
->
MOVE LINES WITH JOG. SELECT WITH SHUTTLE
NETWORK SET setting
1
Insert a LAN card or a PCMCIA-compatible Ethernet card
(sold separately) into the PC card slot at the rear of the
digital video recorder.
This will enable you to view images on this unit and make menu
settings through the network (LAN) from a personal computer.
ID1, ID2 and ID3 passwords are required.
Note: A PCMCIA card-type LAN card (sold separately) and an
Ethernet cable are necessary in order to connect to a network.
(Installed)
Locking can be
carried out easily
by sliding the
knob.
(Removed)
Return the knob
after unlocking.
1
2
Press the MENU button twice to display the MAIN MENU 2
screen.
The cursor moves to DISPLAY SET/VIDEO LOSS SET.
MENU
Sub-menus
<NETWORK SET>
LAN CARD
: LAN1
NETWORK CONTROL : OFF
IP ADDRESS
: 192.168. 0. 1
SUBNET MASK
: 255.255.255. 0
GATEWAY
:
PASSWORD SETTING
ID
: PASSWORD (4-8)
ID1
: 1111----
ID2
: 2222----
ID3
: 3333----
1
3
2
3
2
Sets LAN card.
Sets NETWORK control.
0. 0. 0. 0
Enter IP ADDRESS.
Enter SUBNET MASK.
Enter GATEWAY.
Sets the three levels of user passwords.
3
Use the jog dial to move the cursor to the NETWORK SET
setting, and then turn the shuttle dial clockwise.
The NETWORK SET sub-menu appears, and the cursor moves
to LAN CARD.
4
Turn the shuttle dial clockwise.
"LAN1" flashes.
Select LAN1 or LAN2 to suit the type of card being used.
•
LAN1: COREGA FEther PCC-TXD "CG-FEPCCTXD" type
(10/100 BASE-T)
•
LAN2: COREGA Ether PCC-TD "CG-EPCCTD" type (10
BASE-T) or COREGA Ether II PCC-T (10 BASE-T) or
D-Link DE-660
Note: Correct operation cannot be guaranteed if a LAN card other
than the one recommended above is used.
5
Use the jog dial to select the LAN card (example: "LAN1"),
and then turn the shuttle dial clockwise.
The cursor moves to NETWORK CONTROL.
64
<NETWORK SET>
LAN CARD
: LAN1
NETWORK CONTROL : OFF
IP ADDRESS
: 192.168. 0. 1
SUBNET MASK
: 255.255.255. 0
GATEWAY
:
0. 0. 0. 0
PASSWORD SETTING
ID
: PASSWORD (4-8)
GUEST
: 1111----
USER
: 2222----
ADMIN
: 3333----
<NETWORK SET>
LAN CARD
: LAN1
NETWORK CONTROL : OFF
IP ADDRESS
: 192.168. 0. 1
SUBNET MASK
: 255.255.255. 0
GATEWAY
:
0. 0. 0. 0
PASSWORD SETTING
English
Advertisement
Table of Contents
