IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following: WARNING: The polyethylene bags over the product or its packaging may be dangerous. Keep these bags out of the reach of babies and children.
Page 3
4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 5. Iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. Do not attempt to repair the appliance.
18. When installing or removing attachment, please be sure the unit is off and no steam is being released to avoid contact with hot water. 19. Use caution when installing or removing attachment as it may contain hot water from condensation. Ensure the attachment is dry or cooled off to avoid contact with hot water.
GETTING TO KNOW YOUR STEAMER Variable temperature control dial Rotating handle Water tank Handle release release lever button Removable water tank "Continuous steam" button Stainless steel soleplate Steam ready indicator...
Page 6
OPERATING INSTRUCTIONS 1. The CGS19A Fabric Steamer functions as both a steamer and an iron. Simply depress the rotating handle release button and rotate the handle out for steaming and in for ironing. 2. Plug the unit into your electrical outlet. Both red and green lights will glow.
3. Using the other hand, turn the locking cover tab and push the attachment away from the handle. Grab the ribbed surface on the side of the attachment and pull off. 4. After use, reverse the process in step two. Removeable Crease Lint/Fabric Bristle...
Page 8
2. Hang your garment or fabric. 3. Pass the steam jets just above the fabric where the wrinkles are. It may take a few passes to remove the wrinkles completely. 4. After use, empty any remaining water from the tank to avoid leakage.
3. When pressing, it is recommended that you use an ironing board to achieve good results and prevent damage to furniture and other surfaces. 4. If pressing different types of fabrics, start by pressing delicate fabrics first at lower temperatures and gradually progress to higher temperatures.
Need help?
Do you have a question about the CGS19A and is the answer not in the manual?
Questions and answers