Conair GS15RN - Handheld Fabric Steamer Instruction Manual

GETTING TO KNOW YOUR STEAMER

Please become well acquainted with the GS15RN before use. If you have any questions about this product, please call our help line at 1-800-CONAIR.

FILLING INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

1. Place the unit on a stable surface.
2. While holding the water tank with one hand, move the release lever toward the power cord.
3. With the reservoir released, pull up on the reservoir to remove it from the body of the unit.
4. Turn the reservoir over, revealing the rubber inlet cover.
5. Open the inlet cover and fill the tank with everyday tap water (filtered water may reduce hard water problems).
6. Close the inlet cover and return thereservoir to its place, making sure that the reservoir is secure.

OPERATING INSTRUCTIONS

• Plug the unit into the electrical outlet.
• Release lever will light up. Allow one or two minutes for the unit to warm up. The appliance is ready to use when release lever light is off.
• Holding the steam jet away from you and anyone else in the room, engage the trigger. Steam should now be released from the steam jets.
• When first using the device test on an old cloth, as there may be sediment left from the manufacturing process transportation.
• To stop the flow of steam, release the trigger.
• Unplug the device when it is not in use.

STEAMING TIPS

1. To prepare your fabric for steaming, brush it with the fabric/lint brush attachment. This will loosen the fibers and allow better steam penetration.
2. Hang your garment or fabric.
3. Pass the steam jets just above the fabric where the wrinkles are. It may take a few passes to remove the wrinkles completely.
4. After use, empty any remaining water from the tank to avoid leakage.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Conair GS15RN - Handheld Fabric Steamer Instruction Manual