Checking The Indoor Unit Option Switch Settings - Samsung MWR-WS00 Installation Manual

Additional Functions (Continued)
20
E-

Checking the Indoor Unit Option Switch Settings

In order to check the indoor unit option switch settings using the
wired remote controller, hold down the
and the button at the same time for 5 seconds.
1 The menu will display
Press the button and select the appropriate menu
referring to the table below.
Value
9 Centralized control switch
10 Drain pump switch
11 Electric heater switch
12 Hot water heater switch
Note ' ' will be displayed if the indoor unit does
not support the function and the setup mode
cannot be entered.
2 If the option switch is set to ON (which means disable
function), the value will display . If the option switch is set to
OFF (which means enable function), the value will display .
3
Press the button to exit.
4
Press the button anytime during setup to exit without
setting.
and
.
Data
buttons