Rpm Compensation - Samsung MWR-WS00 Installation Manual

Additional Functions (Continued)
16
E-

RPM Compensation

In order to compensate for the RPM using the wired remote
controller, hold down the
the button at the same time for 5 seconds.
1 The menu will display
Press the button until
Press the button.
Note '

not support the function and the setup mode
cannot be entered.
RPM compensation can be set only for FAN

relay control models.
2
Press the
and press the
Value
0 Default (Use indoor unit PCB setting)
1 Set RPM compensation
2 Cancel RPM compensation
3
Press the button to exit.
4
Press the button anytime during setup to exit without
setting.
and buttons and
.
is displayed.
' will be displayed if the indoor unit does
buttons to set the RPM compensation
button.
Function