Setting The Rmc Address - Samsung MWR-WS00 Installation Manual

Setting the RMC Address

In order to set the RMC address of the indoor unit using the
wired remote controller, hold down the
and the button at the same time for 5 seconds.
1 The menu will display
Press the button and the menu will display
Press the button.
2 The main address of the indoor unit will be displayed on the
left and the RMC address of the indoor unit will flicker on the
right as shown.
3
Press the
the button.
4
Press the button to exit.
5
Press the button anytime during setup to exit without
setting.
6 Hold down the
the wired remote controller and to restore the RMC address set
by the switch on the indoor unit PCB.
and
.
buttons to set the RMC address and press
button to delete the RMC address set by
buttons
.
13
E-