Clock Setting - Kenwood K28CB11 Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will show "0:00", and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the clock/kitchen timer button and
the LED display will show "00:00" with the
first 2 digits flashing.
2. Press the numeric (0-9) buttons to enter
the time. For example, to input the current
time 12:30, you need to press "1", "2", "3",
"0". The input hour has to be within 0-23
and the input minutes has to be within
0-59.
3. Press the clock/kitchen timer button again
to complete the clock setting.
":" will start flashing and the time will
illuminate.
• If the clock is not set, the microwave
will not function.
• In the process of clock setting, if the
stop/clear button is pressed or if
there is no operation within 1 minute,
the microwave will go back to the
previous status automatically.
• If the clock needs to be reset, please
repeat steps 1 to 3.
• To find out the current time while
the microwave is operating, press
the clock/kitchen timer button. It
will last for 2-3 seconds and then
return to its original display.
12
K28CB11_IB_final110217.indd 12
microwave grill convection combination
1 2 3
vegetable sh meat
4 5 6
pasta potato soup
7 8
start
roast bread
+30sec
9 0
stop
cake pizza
clear
auto roast cooking
clock/
reheat memory defrost
kitchen timer
h-1: auto reheat d-1: defrost by time
h-2: dinner plate d-2: defrost by weight
h-3: co ee d-3: ground meat
h-4: roll d-4: sea food
2
1, 3
17/02/2011 11:01 AM