1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Drill
  5. DC900-XE
  6. Instruction manual

DeWalt DC900-XE Instruction Manual

Heavy-duty 36v cordless hammerdrill
Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTRUCTION MANUAL
DC900-XE
HEAVY-DUTY 36V CORDLESS HAMMERDRILL

Advertisement

Table of Contents
loading

Related Manuals for DeWalt DC900-XE

Summary of Contents for DeWalt DC900-XE

  • Page 1 INSTRUCTION MANUAL DC900-XE HEAVY-DUTY 36V CORDLESS HAMMERDRILL...

  • Page 3: Definitions: Safety Guidelines

    c. Keep children and bystanders away while operating a power tool. Definitions: Safety Guidelines Distractions can cause you to lose control. 2. ELECTRICAL SAFETY The definitions below describe the level of severity for each a. Power tool plugs must match the outlet. Never modify the plug in any signal word.
  • Page 4 f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, b. Recharge only with the charger specified by the manufacturer. A charger clothing and gloves away from moving parts. Loose clothes, jewellery or that is suitable for one type of battery pack may create a risk of fire when long hair can be caught in moving parts.

  • Page 5: Important Safety Instructions For Battery Chargers

    • Use clamps or other practical way to secure and support the workpiece to a WARNING: Use of this tool can generate and/or disburse dust, which may cause stable platform. Holding the work by hand or against your body is unstable and serious and permanent respiratory or other injury.
  • Page 6 • DO NOT attempt to charge the battery pack with any chargers other than the • Do not operate charger with damaged cord or plug — have them replaced ones in this manual. The charger and battery pack are specifically designed to immediately.

  • Page 7: Storage Recommendations

    • Do not incinerate the battery pack even if it is severely damaged or is that the battery terminals are protected and well insulated from materials that could completely worn out. The battery pack can explode in a fire. Toxic fumes and contact them and cause a short circuit.

  • Page 8: Important Charging Notes

    be tuned up weekly or whenever the battery no longer delivers the same amount of work. To use the automatic tune-up mode, place the battery pack in the charger and leave it for at least 8 hours. Important Charging Notes 1.

  • Page 9: Key Features And Functions

    FIG. 1 FIG. 1 FIG. 2 FIG. 3 Forward/Reverse Control Button (Fig. 1) A forward/reverse control button (B) determines the direction the tool will spin and also serves as a lock-off button. To select forward rotation, release the trigger switch and depress the forward/reverse control button on the right side of the tool.
  • Page 10 Three-Speed Gearing (Fig. 2) SCREWDRIVING (FIG. 2) 1. Select the desired speed/torque range using the three-speed gear shifter (E) on The three-speed feature of your tool allows you to shift gears for greater versatility. To the top of tool to match the speed and torque to the planned application. To set select speed 1 (highest torque setting), turn the tool off and permit it to stop.

  • Page 11: Side Handle

    Side Handle while using the other hand to secure the tool. FIG. 7 Rotate the sleeve clockwise until sleeve can- CAUTION: Always operate the tool with the side handle not be rotated any further, as demonstrated properly assembled. Hold tool with both hands to maximize in Figure 7.

  • Page 12: Maintenance

    Repairs 2. Drill straight, keeping the bit at a right angle to the work. Do not exert side pres- sure on the bit when drilling as this will cause clogging of the bit flutes and a This charger is not user serviceable. There are no user serviceable parts inside the slower drilling speed.

  • Page 13: Patent Notification

    30 DAY NO SATISFACTION GUARANTEE If you are dissatisfied with any D WALT power tool, laser or nailer, for any reason, simply return it to the point of purchase with your sales receipt within 30 days for a replacement unit or a full refund. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call (AUS) 1800 654 155 or (NZ) 09 526 2556 for a free replacement.
  • Page 16 WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 • 20 Fletcher Road, Mooroolbark, VIC 3138 Australia (JUL06) Form No. 643731-00 DC900-XE Copyright © 2006 D WALT The following are trademarks for one or more D WALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip; the kit...

Table of Contents