Hitachi AJ-S60TXP User Manual page 9

Installation of Washing Machine
1
Adjust the instability of the washing
machine with adjustable leg.
Fixed leg
Adjustable leg
Inspection of trial run
Put some water into the washing barrel and reconfi rm its
horizontality.
The ground is level if all front, rear, left and right height difference between
•
the spinning hole and water surface are less than 3mm.
To install the machine on an inclined fl oor, leg caps in the attached accessory kit can be used to adjust height by
connecting them to the fi xed leg.
Confi rming the machine type of AJ-S60TXP, please install the water drninage hose and hang it on, otherwise there will
be no water in washing basket.
AJ-S60TXP
How to Use the Adjustable Leg
1
Loosen the lock nut by unscrewing
in arrow direction 1 before using the
adjustable leg to stabilize unit.
Loosening
Elevating
(B C )
10
1
Lock nut
Adjustable leg
Lowering
2
Please make sure of the horizontality of
the washing machine.
• As shown in the fi gure, the horizontality can be easily
observed by the string used to hang an object.
It is level if the
clearance between
A and machine body
is the same with that
string
between A and the
machine body.
A
A
object
3mm
2
After adjusting of the unit, tighten
the lock nut by screwing it in arrow
direction.
Plastic base
Tighten the lock nut until it reaches the plastic base.
Maximum adjust able
At most 40mm
range is 40mm.
40mm
A
(front or
profi le)
A
B C
2
Tightening
Lock nut
9