Charge The Battery; Charge The Battery Wirelessly - Kyocera Verizon User Manual

Charge the Battery

Fully charge the battery before powering on the phone.
Important: Unplug the charger from the electrical outlet when not in use to reduce the
environmental impact of charging.
1. Open the cover to the USB/charging port on the bottom of the phone.
2. Plug the smaller end of the USB cable into the phone's USB/data port.
3. Plug the other end of the USB cable into the charger, and then plug the charger into an
electrical outlet. Be sure to use the charger that came with your phone.
4. When charging is complete, remove the cable from the port and close the cover. Press
around the edges of the cover to ensure that it is securely closed.
Warning: Be sure all ports and covers are properly sealed to maintain the phone's
waterproof capability.

Charge the Battery Wirelessly

Your phone supports Qi and works with Qi-enabled chargers. Follow the steps below to charge
the battery using a wireless charger.
1. Locate the charging area on your wireless charger by referring to the charger
documentation.
2. Place your phone in contact with the charger, ensuring that the charging area of your
phone touches the charging area of your wireless charger.
Get Started 5