To Connect The Sync Cradle And Charge The Battery - Kyocera QCP 6035 User Manual

2. Slide the battery into the compartment with the Kyocera label facing you.
The end of the battery with four copper-colored depressions goes toward
the top of the phone.
3. Apply gentle pressure until the battery snaps into place. Then replace the
battery cover.

To connect the sync cradle and charge the battery

1. Insert the small round plug of the power cable ( a ) into the base of the
sync cradle. Plug the other end of the power cable into a wall outlet.
6
All manuals and user guides at all-guides.com
Sync cradle
Power cable connects to an AC power
outlet.
Data cable connects to the
computer COM port.
Kyocera QCP 6035 Smartphone User's