Musical Fidelity kW Phono Instructions For Use Manual

Musical Fidelity kW Phono Instructions For Use Manual

Phono preamp

Advertisement

Quick Links

XX
kW Phono
PHONO PREAMPLIFIER
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity kW Phono preamplifier.
Used properly and carefully, it should give many years of outstanding musical
reproduction.
Aesthetically, the kW Phono is a perfect match for the
kW 750 Power Amplifier, kW Hybrid Line Level Preamplifier
and kW SACD Player.
Together they form one of the finest hi-fi systems available.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning
or polishing agents - they may harm the surface finish.
If you have any questions about your audio system,
please consult your dealer who is there to help and advise.
kW Phono Preamplifier
Instructions for use
Page 1 of 7
Issue 2 (LP) : 10 March 2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the kW Phono and is the answer not in the manual?

Questions and answers

Summary of Contents for Musical Fidelity kW Phono

  • Page 1 Phono PHONO PREAMPLIFIER INSTRUCTIONS FOR USE Thank you for purchasing the Musical Fidelity kW Phono preamplifier. Used properly and carefully, it should give many years of outstanding musical reproduction. Aesthetically, the kW Phono is a perfect match for the kW 750 Power Amplifier, kW Hybrid Line Level Preamplifier and kW SACD Player.
  • Page 2: Safety Information

    If connecting to a BS1363 plug, a 13 amp fuse must be used. WARNING: Any modifications to this product not expressly approved by Musical Fidelity who is the party responsible for standards compliance could void the user’s authority to operate this equipment.
  • Page 3: General Advice

    Heed all warnings shown on the back of the product. Only connect the kW Phono to a mains outlet having the same voltage as marked at the back of the unit.
  • Page 4: Front Panel

    23 Audio output socket - LEFT channel 17 Moving Coil LOADING socket (see page 5 for connection and switch setting details) - right channel kW Phono Preamplifier Instructions for use Page 4 of 7 Issue 2 (LP) : 10 March 2005...
  • Page 5: Input Connections

    OFF. MM input socket is for matching the characteristics of your phono pickup and lead to the kW Phono. When all the switches are INPUT CONNECTIONS off (up), the input impedance is 68K Ohms in parallel with 47pF capacitance.
  • Page 6: Operation

    Muting is then disabled, and feet illumination then fades over approximately fifteen seconds to yellow, showing that your kW Phono is now ready for use. After a period of about 35 minutes, the LED feet colour fades to blue, confirming that the preamplifier is fully warmed up.
  • Page 7: Specifications

    IEC mains lead - 10 Amp type Moving coil pickup loading plugs, (2 each) of 100, 200, 500, 1K and 5K Ohms resistance Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice kW Phono Preamplifier...

Table of Contents