Operating A Vcr/Stb Using The Remote Control - JVC DD-8 Instructions Manual

Operating other devices using the remote control (continued)
5
Release [TV F].
NOTE
• Manufacturer codes are subject to change with-
out notice. You may not be able to operate the
TV produced by the manufacturer.
• After replacing the batteries of the remote con-
trol, set the manufacturer code again.
Using the remote control for the TV
operation
Operate the remote control by pointing it at the TV.
.
Remote
Usage
control button
[TV ] Turns on/off the TV.
F
Changes between the TV and
[TV/VIDEO]
video input.
[TV CHANNEL
Changes channels.
+/ ]
–
[TV VOL +/ ] Adjusts volume.
–
Number but- Slide the
tons (1-9, 0, remote control
100+) mode selector
to [TV] in
advance.
[TV RETURN]
NOTE
• When the remote control mode selector is slid to
[TV], some buttons may not work.
47
Operating a VCR/STB using
the remote control
1
2
3
4
5
Manufacturer codes for VCRs
Examples:
Selects the
For a Hitachi VCR: Press [0], then [8].
channels.
For a Toshiba VCR: Press [3], then [3].
When the manufacturer of your VCR has 2 or more
Changes
codes, select the manufacturer codes in turn and
between the
find the one that operates the VCR and the remote
previously
control properly.
selected chan-
nel and the cur-
Manufacturer Code
rent channel.
JVC
Aiwa
Bell+Howell 03, 16
Blaupankt 04
CGM
Daewoo
DIGITAL
Fisher
G.E.
Grundig
Hitachi
Loewe
Magnavox 04, 05
Mitsubishi
Setting the manufacturer code
Slide the remote control
mode selector to [VCR/
STB].
Press [VCR] or [STB].
Hold down [VCR/STB F].
• Hold down [VCR/STB F] until you finish
step 5.
Press [ENTER] and release.
Press number buttons to enter the
manufacturer code.
Manufacturer Code
01 Nokia
02, 20 Nordmende
Orion
Panasonic 21
03, 05, 16 Philips
34 Phonola
05 Saba
03, 16 Samsung 24, 25
06 Sanyo
07 Sharp
08, 09 Siemens
05, 10, 11 Sony
Telefunken
12, 13, 14,
Toshiba
15
16
17, 18, 19,
31
20
05, 22
05
17, 18, 19,
23, 31
03, 16
26, 27
07
28, 29, 30,
35
17, 18, 19,
31, 32
33