Sanyo PLV-55WHD1 Service Manual page 53

37-
3 Cabinet Front unit disassemblies.
1. Remove the 6 Screws-A(T4x12) and remove the Holder Top.
(Remove the 8 Screws.-------- PLV-65WHD1)
2. Remove the 8 Screws-B(T4x12) and remove the 2 Holder Sides.
(Remove the 10 Screws.-------- PLV-65WHD1)
3. Remove the 6 Screws-C(T4x12) and remove the Holder Bottom.
(Remove the 8 Screws.-------- PLV-65WHD1)
4. Remove the Screen.
Caution:
Do not disassembly the screen.
Cabinet Front
Screen handling precaution;
1. Wear gloves when handling the screen to prevent fingerprints (also, protection of hand).
2. Do not use force when handling the screen so that edges will not brake or crack.
3. Be careful in handling at the process of disassemblies, because scratch or scrub wound makes transparency
decrease easily.
4. The screen in a dust free environment because static electricity occurs.
5. Do not stand a screen obliquely for long time.
6. Use thinned synthetic detergent for cleaning, because of the weakness against solvent. Wipe gently with soft
cloth.
7. The screen has laminated Lenticular lens and the Fresnel lens. Avoid too much vibration after lamination of
Lenticular lens and Fresnel lens. Scrub wound on lens occurs by vibration.
Holder Side
Screen
- 53 -
Holder Top
A
B
A
B
B
B
C
C
C
C
Holder Bottom
Mechanical disassemblies
A
A
A
A
B
C
B
C
B
B
Holder Side
Fig. 37-3