Sanyo PLV-55WHD1 Service Manual page 34

Mechanical disassemblies
20
Optical unit removal.
1. Remove the 5 Screws(M3x12.6) and remove the Optical unit.
21
Lamp Reflector unit removal.
1. Remove the 3 Screws(T3x10) and remove the Lamp Reflector unit.
Note: The screw tightening procedure is as follows.
1. Tighten the screw (a).
2. Tighten the screw (b).
3. Tighten the screw (c).
b
Optical Unit
a
Lamp Reflector unit
c
- 34 -
Fig. 20
Fig. 221