Mechanical Disassemblies - Sanyo PLV-55WHD1 Service Manual

■ Mechanical Disassemblies

Disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause lose of performance and product safety.
The wiring method of the leads and ferrite cores should be returned exactly the
same state as the original, otherwise it may cause lose of performance and prod-
uct safety.
1
Cabinet bottom cover removal.
1. Remove the 10 screws-A(T4x14) and remove the Cabinet bottom cover.
Cabinet bottom cover
A
A
A
A
A
A
A
A
- 15 -
Tapping screw
A
A
Screws Expression
(Type ) mm
Diameter x Length
T type M Type
Machine screw
Fig. 1