Table of Contents
Advertisement
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
•
Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong,
Jungwon-Gu, Sungnam, Kyungki-Do, Korea 462-703
TEL : 82-31-740-8137~41 FAX: 82-31-740-8145
SAMSUNG OPTO-ELECTRONICS UK LTD (SOUK)
•
Samsung House, 1000 Hillswood Drive Hillswood Business
Park Chertsey Surrey KT16 OPS
TEL : 44-(0)1932-45-5308
FAX: 44-(0)1932-45-5325
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA)
•
Closed Circuit Division 40 Seaview Drive, Secaucus NJ 07094,
U.S.A
TEL : (201) 902-0347 FAX: (201) 902-0429
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD (TSOE)
•
7 Pingchang Rd, Nankai Dist, Tianjin, P.R China
Post Code : 300190
TEL : 86-22-2761-9698 FAX: 86-22-2761-6514
P/No. : 6806-0458-01B
VAN 04. 10
Vandal-Proof Color Dome Camera
INSTRUCTION MANUAL
SVD-4120A /AW
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
SAMSUNG CCTV CAMERA
Advertisement
Table of Contents
Related Manuals for Samsung SVD-4120AW
Summary of Contents for Samsung SVD-4120AW
-
Page 1: Instruction Manual
SAMSUNG OPTO-ELECTRONICS UK LTD (SOUK) TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD (TSOE) • • Samsung House, 1000 Hillswood Drive Hillswood Business 7 Pingchang Rd, Nankai Dist, Tianjin, P.R China Park Chertsey Surrey KT16 OPS Post Code : 300190 TEL : 44-(0)1932-45-5308... - Page 2 Thank you for purchasing a SAMSUNG CCTV CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order that you can understand this manual thoroughly, we'll introduce our model description. SVD-4120A Series (410,000 pixels) The lightning flash with an arrowhead symbol, within an equilateral triangle is •...
- Page 3 In normal or high luminance, camera It could cause an electric shock. equivalent to 2.5x zoom.(2.5 to 6.0mm, maintains color mode. On the contrary, it equivalent to 2.4x zoom/SVD-4120AW) get changed into B/W mode in low The built-in lens allows the camera to luminance.
-
Page 4: Table Of Contents
Contents Setting Up The Menu Precautions • CAMERA ID • BACKLIGHT Composition • WHITE BALANCE • MOTION DETECTION Name and Function of Each Section • IRIS LEVEL CONTROL • SHUTTER SPEED CONTROL • SESE UP Connection • GAIN Connecting to Monitor •... -
Page 5: Precautions
Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or Never keep the camera face to extreme temperature conditions. environment where the humidity is high. subject them to physical shocks. strong light directly. -
Page 6: Composition
Name and Function of Each Section Composition 1. SVD-4120A/AW 2. Instruction Manual 3. Quick Install Guide 4. Wrench 5. Ø5 Tapping Screws 4EA 6. Template 7. Video Output Cable for installer COLOR DOME CAMERA User’s Manual COLOR DOME CAMERA User’s Manual... -
Page 7: Connection
Connection Name and Function of Each Section Pan Base Connecting to Monitor control panning angle of camera Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. Tilt Base Holding Serews fix tilted position. Pan Base Holding Screws (Color : Silver) fix panned position Zoom Handle adjust zoom between WIDE and TELE... -
Page 8: Connecting To Power
Connection Operating Your Camera Connecting to Power Configuration of The Menu SETUP MENU CAMERA ID (see page 17) • Use AC 24V / 300mA or DC 12V / 500mA power source. • OFF • ON BACKLIGHT (see page 20) • WDR •... -
Page 9: Setting Up The Menu
Operating Your Camera SETUP Setting Up The Menu Select the function using CAMERA ID Change the status using the LEFT or RIGHT button. Use the five SETUP MENU buttons on back of the camera. the UP or DOWN button. BACKLIGHT WHITE BAL. - Page 10 Operating Your Camera 3. Press SET button. 5. Select the position at which the CAMERA ID will be located on the screen. Move the cursor to 'POS' and press SET button. CANERA ID CAMERA ID CLR RESET END CLR RESET END 4.
-
Page 11: Backlight
Operating Your Camera 4. When completed, press the SET button. BACKLIGHT Notes SV-II DSP chip built-in provides intelligent light level control to overcome the severe Backlight conditions. • If you select WDR mode, the following phenomenon may appear by lighting 1. -
Page 12: Motion Detection
Operating Your Camera S-ATW(Special Auto Tracking White balance): When color temperature is 2. Set ‘MOTION DET.’ to the desired mode using LEFT or RIGHT button. 1800~6000K, specially in sodium lamp, select this mode. (EX. sodium lamp, SETUP inside the tunnel) CAMERA ID BACKLIGHT AWC(Auto White balance Control): The white balance is automatically... -
Page 13: Iris Level Control
Operating Your Camera · Move the arrow indicator to 'TOP' using the UP or DOWN button and increase or Tips on Using the Motion Detection Feature decrease the value using the LEFT or RIGHT button. Repeat the procedure for • As you increase or decrease MD LEVEL, the areas’ sensitivity is increased or bottom, left and right. -
Page 14: Shutter Speed Control
Operating Your Camera 4. When completed, press the SET button. SHUTTER SPEED CONTROL You can control brightness of the screen by the shutter speed. Notes 1. Press the SET button to display the setup menu and move the arrow indicator •... -
Page 15: Gain
SSNR MIDDLE SPECIAL EXIT SSNR(Samsung Super Noise Reduction) To reduce the noise on the screen. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SSNR’ using the UP or DOWN button. 2. Set ‘SSNR’ to desired mode using the LEFT or RIGHT mode. -
Page 16: Special
Operating Your Camera Notes SPECIAL • When the power frequency is 50Hz, you can not use line-lock mode(NTSC Models). • When the power frequency is 60Hz, you can not use the line-lock mode(PAL Models). • ‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power. PRIVACY: To mask area which you want to mask - OFF: Deactivation - ON: Privacy mode activated... -
Page 17: Troubleshooting
Troubleshooting If you have trouble operating your camera, refer to the following table. If the Problem Solution guidelines do not enable you to solve the problem, contact an authorized technician. The color of the picture • Check that you have properly set the ‘WHITE BAL.’ is not matched. -
Page 18: Dimention
Dimension Specifications Ø 148mm Item SVD-4120AN SVD-4120AP SVD-4120AWN SVD-4120AWP Power Source DC 12V / AC 24V compatible Power Consumption 280mA(DC) / 3.8W(AC) Image Sensor 1/3”, Vertical double density interline CCD Total Pixels 811(H)x508(V), 1/3”CCD 759(H)x596(V), 1/3”CCD 811(H)x508(V), 1/3”CCD 759(H)x596(V), 1/3”CCD Effective Pixels 768(H)x494(V), 1/3”CCD 752(H)x582(V), 1/3”CCD... -
Page 19: Declaration Of Conformity
DECLARATION OF CONFORMITY MEMO Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera... - Page 20 MEMO MEMO...