Table of Contents
Advertisement
Menu
Allows you to set preferences for the on-screen menu.
Menu Mode
This feature allows you to select two menu modes: one has basic func-
tionality and the other more advanced functionality.
Basic Mode ................. This is the normal mode.
Advanced Mode .......... This mode is used for advanced users. In this mode
you can change the following settings:
Gamma Correction, Aspect Ratio, Noise Reduction,
Color Matrix, White Balance, Auto Adjust, Position/
Clock, Resolution, Factory Default, Menu Display
Time, Signal Select, Auto Start, Power Management,
Power Off Confirmation and Clear Lamp Hour Meter.
Language
You can choose one of seven languages for on-screen instructions.
The options are: English, German, French, Italian, Spanish, Swedish
and Japanese.
Projector Pointer
This enables you to select from eight different Pointer icons for the
"Pointer" button on your remote control.
After moving your Pointer icon to the area you want on the screen,
press the Magnify button on the remote control to enlarge the selected
area on the screen. See page E-27 for more details.
NOTE: There may be cases where the Pointer function is not available (ex. a
non-interlace signal at 15kHz such as video game.)
Source Display
You can turn on and off the information for input name such as VIDEO
and RGB.
When this option is on, the current input will be displayed each time you
switch sources or turn on the rear projection display.
Volume Bar (Direct Button)
This option turns on or off the volume bar when you adjust the sound
volume using VOLUME+/-(up and down) button.
On ................ You can increase or decrease the sound volume with the vol-
ume bar on screen.
NOTE: If no adjustments are performed within 3 seconds, the Volume bar
will disappear.
Off ................ You can increase or decrease the sound volume without hav-
ing to use the volume bar.
Menu Display Time (Advanced mode)
This option allows you to select how long the rear projection display
waits after the last touch of a button to turn off the menu.
The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec", and "Auto
45 sec". The "Auto 45 sec" is the factory preset.
Manual ......... The menu can be turned off manually.
Auto 5 sec .... The menu will automatically be turned off in 5 seconds if no
buttons are pressed within 5 seconds.
Auto 15 sec .. The menu will automatically be turned off in 15 seconds if no
buttons are pressed within 15 seconds.
Auto 45 sec .. The menu will automatically be turned off in 45 seconds if no
buttons are pressed within 45 seconds.
Setup
Enables you to set operating options.
Press "OK" to save your changes for all the features of Page1, Page2,
and Page3.
[Page1]
Background
Use this feature to display a black/ blue screen or logo when no signal
is available.
[Page2] (Advanced mode)
Signal Select
[RGB]
Allows you to choose "RGB" for an RGB source such as a computer, or
"Component" for a component video source such as a DVD player.
Normally select "Auto" and the rear projection display automatically de-
tects a component signal. However there may be some component sig-
nals that the rear projection display is unable to detect. If this is the
case, select "Component".
E – 34
Advertisement
Table of Contents
