Table of Contents
Advertisement
Menu Descriptions & Functions
Source Select
Enables you to select a video source such as a VCR, DVD player, laser
disc player, computer or document camera depending on what is con-
nected to your inputs. Press the "Select" button on the cabinet or
buttons on your remote control to highlight the menu for the item you
want to adjust.
RGB
Selects the computer connected to your RGB or component signal.
NOTE: An optional 15-pin-to-RCA 3 cable (ADP-CV1) is needed for a compo-
nent signal.
Video
Selects what is connected to your Video input-VCR, laser disc player,
DVD player or document camera.
S-Video
Selects what is connected to your S-Video input-VCR, DVD player, or
laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back
in fast-forward or fast-rewind with a Video or S-Video source.
Picture
Provides access to controls for your image. Use the "Select" button on
the cabinet or the remote control to highlight the menu for the item you
want to adjust.
Brightness
Adjusts the brightness level or the back raster intensity.
Contrast
Adjusts the intensity of the image according to the incoming signal.
Color
Increases or decreases the color saturation level (not valid for RGB).
Hue
Varies the color level from +/- green to +/-blue. The red level is used as
reference. This adjustment is only valid for Video and Component in-
puts (Not RGB).
Sharpness
Controls the detail of the image for Video (Not for RGB and Compo-
nent).
Volume
Adjusts the sound level of the rear projection display.
NOTE: You can display the volume bar without opening the menu.See "Volume
Bar (Direct Button)"on page E-34 for more details.
Image Options
Basic Mode
Provides optional controls such as Color Temperature and Lamp Mode.
When you select Advanced Mode, the following options are available:
Gamma Correction, Aspect Ratio, Noise Reduction, Color Matrix, White
Balance, Auto Adjust, Position/Clock, Resolution, and Factory Default.
Color Temperature
This feature adjusts the color temperature using the slide bar.
Move the slide bar to the right to increase the color temperature for a
bluish image; to the left to decrease it for a reddish image.
E – 31
Advanced Mode
Advertisement
Table of Contents
