Neuton CE6.3 Safety & Operating Instructions Manual

Neuton CE6.3 Safety & Operating Instructions Manual

Battery-powered mower

Advertisement

NEUTON P
Equipment
OWER
75 Meigs Road
P.O. Box 25
Vergennes, VT 05491
Toll-Free phone: 1-866-NEUTON1 (638-8661)
Fax: 1-802-877-1213
Website:
www.neutonpower.com
E-
:
@
.
MAIL
INFO
NEUTONPOWER
COM
Read and understand this manual and all instructions before operating this Mower.
Battery-Powered Mower
Safety & Operating Instructions
UPDATED
MAY 2010
Model: CE6.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CE6.3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Neuton CE6.3

  • Page 1 Battery-Powered Mower Safety & Operating Instructions Model: CE6.3 UPDATED MAY 2010 NEUTON P Equipment OWER 75 Meigs Road P.O. Box 25 Vergennes, VT 05491 Toll-Free phone: 1-866-NEUTON1 (638-8661) Fax: 1-802-877-1213 Website: www.neutonpower.com MAIL INFO NEUTONPOWER Read and understand this manual and all instructions before operating this Mower.
  • Page 2: Table Of Contents

    Tools Needed: This indicates you will need a special tool to perform a maintenance function on your Mower. Neuton Power Equipment reserves the right to discontinue, change, and improve its products at any time without notice or obligation to the purchaser. The descriptions and specifications contained in this manual were in effect at printing.
  • Page 3: Chapter 1: Important Safety Considerations

    Chapter 1: Important Safety Considerations We want you to enjoy years of safe and productive use from your NEUTON Battery-Powered Mower. We do not want you injured, so please take a few moments to read the following instructions for safely operating your new Machine.
  • Page 4: Preparing To Use Your Mower

    Mower before starting. • Never operate the NEUTON Mower without the proper guards, safety switches, or other safety and protective devices in place and properly connected. Inspect the machine and cutting blade to determine proper installation of these devices, and they are in good repair, and operate properly.
  • Page 5: Handling The Battery Safely

    Charger label matches the voltage of your Battery. Use of a different Charger may not allow the Battery to fully recharge and may cause a fire or explosion. Use of a non-approved NEUTON Charger will void your warranty.
  • Page 6: Chapter 2: Setting Up Your Neuton Mower

    Chapter 2: Setting Up Your NEUTON Mower NEUTON Mower Package Contents Mulching Plug (260561) NEUTON CE 6.3 Mower w/ Handlebar (2) 8mm x 38mm Shoulder Bolts (2) 8mm Lock Nuts (2) Washers Side Discharge Chute (243191) Bagger (243121) 36mm Wrench (176281) &...
  • Page 7: Assembling Your Neuton Mower

    Step 1: Read the Safety & Operating Instructions before proceeding. The NEUTON Mower is a motorized cutting machine that uses a sharp Blade. For your safety, and for best results, it is important to read the information in “Chapter 1: Important Safety Considerations” before you assemble or use the Mower.
  • Page 8 Step 3: Attach and Adjust the Handlebar. Remove either one of the Wrenches from under the Access Cover and close the Cover (Figure 2 on page 5). Lay the Handlebar on top of the Mower and align the two (2) holes as shown in Figure 3. Insert a 8mm x 38mm Shoulder Bolt from the inside through the aligned holes (Figure 4), attach a 8mm Lock Nut and repeat for other side.
  • Page 9 • Risk of electric shock; do not touch the non-insulated portion of the output connector or the non-insulated Battery terminal. • Use the NEUTON 36V Charger only with the NEUTON 36V Battery. Use of other Chargers or the NEUTON 36V Charger with other types of Batteries may result in bursting of the Battery, which could cause personal injury and property damage.
  • Page 10 Figure 11 Rear Bagger The NEUTON Rear Bagger lets you cut and catch your grass clippings, eliminating the need to rake. The Rear Bagger easily attaches to the rear of the Mower (Figure 12). The Bagger shipped unassembled. The following instructions outline the steps necessary to assemble, install, and remove the Bagger.
  • Page 11 If the Battery is not oriented correctly, it will not fully depress into the opening. If this happens, remove the Battery, recheck the orientation, and try again. Retainer Arm Label Figure 19 Figure 20 Safety & Operating Instructions NEUTON CE6.3 Battery-Powered Mower -...
  • Page 12 Step 7: Adjusting the Cutting Height. Using the Cutting Height Lever located under the Access Cover (Figure 21), adjust the Cutting Height so that you cut off only one (1) to two (2) inches of grass at a time. Open the Access Cover and remove the Safety Key. Make sure all four (4) Wheels are level.
  • Page 13 Spare Battery Spare Cutting Blade Blade Sharpener Protective Cover To learn more about these accessories, call us at 1-866-Neuton1 (638- 8661) or visit us on our web site: www.neutonpower.com Figure 22 Safety & Operating Instructions NEUTON CE6.3 Battery-Powered Mower -...
  • Page 14: Controls And Features

    Controls and Features ⇒ Status Indicator Light Status Indicator Light The green Status Indicator Light (Figure 23) on the Lower Crossbar lights up when you install a charged Battery, insert the Safety Key and when you place the Power/Mode Switch in either the Mow or Auxiliary position.
  • Page 15 Trimmer Cord 80 MIL/2.0mm Diameter x 14.6 Feet/Spool Blade Sharpener Hand-Held Sharpener Protective Cover Fits machine with Handlebars up or down Striper/Roller Attaches to back of Mower Meets CPSC Mower Safety Standards Safety & Operating Instructions NEUTON CE6.3 Battery-Powered Mower -...
  • Page 16: Chapter 3: Operating Your Neuton Mower

    Starting, stopping, and restarting an electric Motor repeatedly within a few seconds can generate a great deal of heat and damage the Motor. To protect the life of your NEUTON Mower, always wait at least five (5) seconds after stopping before restarting the Mower.
  • Page 17: Chapter 4: Charging And Caring For The Battery

    The Battery The NEUTON Mower comes with a sealed, lead acid Battery already installed at the factory. The Battery is 36 volts and rated at 10 amp-hours. The Battery should not leak, regardless of the position in which it is stored. Read “Handling the Battery Safely”...
  • Page 18: Recycling Your Used Battery

    Recycling your Used Battery Never attempt to dispose of your Battery in a fire; the cells may explode. Please dispose of used Batteries responsibly, according to your local hazardous materials regulations. Never throw away used Batteries in your household trash. Please dispose of your used Batteries responsibly by recycling them.
  • Page 19: Chapter 5: Servicing Your Neuton Mower

    Blade to throw objects. Check components frequently, and replace them with the manufacturers recommended parts when necessary. • Check the Blade and Motor mounting bolts at frequent intervals for proper tightness. Use only authorized NEUTON replacement parts. • Keep your Mower free of grass, leaves, or other debris build-up.
  • Page 20: Removing And Attaching The Blade

    Battery to discharge faster. When this occurs, sharpen the Blade (assuming the Blade is otherwise in good condition). Tools and Supplies Needed: Mower • Fine-Toothed File or NEUTON Blade Sharpener (optional) • Safety Glasses Blade Adapter • Vise Remove the Blade (see “Removing and Attaching the Blade”).
  • Page 21: Chapter 6: Troubleshooting Tips

    Neuton Power Equipment Toll Free at: 1-866-NEUTON1 (638-8661) for assistance. Always remove the Safety Key and Battery before performing any adjustments, maintenance, or repairs to your Mower. Troubleshooting Table...
  • Page 22 Troubleshooting Table - continued ROBLEM ORRECTIVE CTION ⇒ Unplug the Battery Charger from your standard 110V wall outlet and from the Charger Receptacle on The Battery LED does the Battery. Inspect the Battery Charger for any visible signs of damage to the body and the cord. If you not turn RED when the observe damage to the Battery Charger, please discontinue use.
  • Page 23: Chapter 7: Parts Lists, Schematic Diagrams, And Warranty

    Chapter 7: Parts Lists, Schematic Diagrams, and Warranty Parts List - NEUTON CE6.3 Mower NOTE: Part numbers listed are available through Neuton Power Equipment. Ref# Part# Description 263191 Upper Handlebar Assembly 260071 Cable Guide, Main Cable 262591 Lid, Cable Guide...
  • Page 24 Schematic Diagrams - NEUTON CE6.3 Mower 081126 www.neutonowners.com...
  • Page 25 081126 NEUTON CE6.3 Battery-Powered Mower - Safety & Operating Instructions...
  • Page 26 CE 6.3 Battery-Powered Mower is fit for ordinary purposes for which a product of this type is used. Neuton Power Equipment however, limits the implied warranties of merchantability and fitness in duration to a period of two (2) years in personal residential household use.
  • Page 27 NOTES: Safety & Operating Instructions NEUTON CE6.3 Battery-Powered Mower -...
  • Page 28 Daily Checklist and Storing for your NEUTON Mower To help maintain your NEUTON Mower for optimum performance, we recommend you follow this checklist each time you use your machine. Also, follow the checklist for storing the machine . Do not insert the Safety Key until you have completed all of the daily checks and you have moved the Mower to the area that you are going to mow.

Table of Contents