Upper Basket With Variable Height Setting; Basket Insert With Variable Height; Settings - Blomberg GVN 9483 E Instruction Manual

Upper basket with variable height
setting
The upper basket is equipped with a lifting
mechanism which enables you to change
the height of the basket without having to
remove it from the dishwasher, even if it is
�
fully loaded.
The height of the upper basket was set to
its lowest position at the factory. To lift the
upper basket to the "high" (A) position, hold
it on one side and carefully pull it upwards.
To lift the opposite side of the basket, hold it
and pull it upwards in the same manner (A).
To lower the upper rack, hold and press
in the rack lever on one side and carefully
lower the rack without releasing the lever
(B). Repeat the procedure with the lever on
the opposite side of the basket. Make sure
�
that both levers catch at the same height.

Basket insert with variable height

settings

You can also use this insert in the lower
basket for glasses and long-handled cutlery
/ utensils.
If you do not need the insert, fold the rack
upwards at the angle shown (A).
Push the entire insert upwards (B). Place
the insert in the upright position (C). Push
the insert downwards and lock it into place
with the holder (D).
�
�
�
When you want to use the basket again,
�
reverse the procedure.
�
�
To set the height, push the rack upwards
and fold it open in position (G).
�
When finished, check that the sprayer arm
can still move freely.
�
�
19 GB