Table of Contents
Advertisement
! For level 5 and level 6 there is no
difference between hardness level
settings.
If the hardness of the water you
use is more than 80°dF (French
Hardness) or if you are using well
water, we recommend that you use
filters and purifiers.
* If your tap water is below 9F
(French hardness), you do not need
to use special dishwasher salt in your
machine. In this case, salt indicator
light will be on continuously.
•
Press the programme selection
button before you switch the
appliance on and keep this button
pressed down.
•
Switch the appliance on using
the on/off switch. The start/stop
indicator light will start flashing.
•
Water hardness can be set to
the desired level by pressing the
programme selection button. The
water hardness setting is shown
with different configurations of
programme indicator lights. Please
compare the test strip with the
water hardness level table and
use the programme selection
button until you reach the desired
configuration.
•
Once you have set the hardness
level press the start/stop button
to save the value. The start/
stop indicator now lights up
permanently.
12 GB
Hide quick links:
Advertisement
Table of Contents
