Page 3
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
instructions for safety and environment This section contains safety • Never wash the product by instructions that will help to spreading or pouring water get protected from risk of onto it! There is the risk of personal injury or property electric shock! damage.
instructions for safety and environment running unless necessary. lack of experience and Be careful for the rush of knowledge if they have hot steam when you open been given supervision or the door. instruction concerning use of the appliance in a safe Intended use way and understand the •...
instructions for safety and environment Transportation of the recycling of electrical and electronic equipment. Please product consult your local authorities If you need to move to learn about these collection the product, do it centers. in upright position Compliance with RoHS and hold from the Directive rear side.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation location Refer to the nearest Authorised Service Agent for installation of your • Place the product on a solid and product. To make the product ready flat floor that has sufficient load for use, make sure that the electricity, carrying capacity! The product must tap water supply and water drainage be installed on a flat surface in order...
Installation Connection to the drain Permitted water temperature: up to 25°C ( 60°C for products equipped Water discharge hose can directly be with aquAvoid™ plus; please refer connected to the drain hole or sink’s toaquAvoid™ plus section ) drainage. The length of this connection The dishwasher may not be connected must be min.
Installation aquAvoid™ plus the local regulations. • Connection must comply with (depends on model) national regulations. The aquAvoid™ plus system protects • Power cable plug must be within against water leaks that may occur easy reach after installation. at the hose inlet.Water contact with the valve box of the system must be Unplug the product after the avoided to prevent damage to the...
Installation Initial use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”. • To prepare the product to do the dishes, perform first operation in the shortest programme with detergent while the machine is empty.
Preparation Tips for energy saving Adjusting the water softening Following information will help you system use the product in an ecological and Washing, rinsing and drying energy-efficient manner. performance of your dishwasher will Wipe away any coarse food remnants improve when the water softening on the dishes before putting them in system is adjusted correctly.
Page 15
Installation Make the necessary Unpack the test Dip in the test strip Take out the strip Wait for 1 minute. Open the tap and adjustment strip. into the water for 1 from the water and let the water flow for according to the test second.
Preparation If the hardness level of the water It is recommended to use that you use is above 90°dF (French granule- or powder-formed standard for water hardness) or if softening salts in the you are using well water, than it is water softening system.
Preparation Detergent You can use powder, liquid/gel or tablet detergents in the machine. Only use in the machine the detergents produced particularly for use with dishwashers. We recommend you not use detergents that contain You can put about 2 kg of chlorine and phosphate softening salt into the salt as they are harmful for the...
Page 18
Preparation 1. Push the latch to right to open the detergent dispenser lid (A). (depends on model) 3. Push the lid of the detergent dispenser to close it. A "click" will be heard when the lid is closed. 2. Put suggested amount of powder, liquid/gel or tablet detergent in the reservoir.
Preparation Tablet detergents Contact the detergent In addition to the conventional manufacturer if your dishes tablet detergents, there are also are wet and/or if you notice commercially available detergent limescale spots particularly tablets that show water softening salt on your glasses after the and/or rinse aid effect.
Preparation Wipe clean any spilled rinse aid outside the reservoir. Rinse aid that spilled accidentally will cause foaming and it will eventually decrease washing performance. Items not suitable for washing 2. Fill the reservoir until “MAX” level. in the dishwasher •...
Preparation Placing the dishes into the dishwasher You can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way. • Wipe away any coarse food remnants (bones, seeds, etc.) on the dishes before placing them in the dishwasher.
Page 22
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 21 / 47 EN Dishwasher / User manual...
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash Cutlery basket is designed to wash your dishes such as knife, fork, spoon, your dishes such as knife, fork, spoon, etc. in an efficient manner. etc.
Preparation Collapsible lower basket tines Bringing the tines to the horizontal position by (depends on model) holding them from the There are foldable tines (A) located tips may cause them to at the lower basket of the machine bend. Therefore, it will be are designed for an easier placement appropriate to bring the tines of large pieces such as pans, bowls,...
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend.
Preparation Lower basket multipurpose / Make sure that the impeller height adjustable service rack does not touch the dishes (depends on model) you placed on the racks. This accessory located at the lower basket of your machine allows you To close the racks: to easily wash pieces such as extra 1.
Preparation Upper basket multipurpose Upper basket height service rack adjustable rack (depends on model) (depends on model) This accessory located at the upper Use the lower and upper parts of the basket of your machine allows you to height adjustable racks in the upper easily wash pieces such as extra long basket of the machine by sliding them ladles and bread knives.
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket 1. Hold the upper basket wires with (depends on model) both hands, slightly lift up the The upper basket height adjustment basket and simultaneously push mechanism has been designed for and release the latches shown in...
Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when In this model, the height setting of the you need a larger space for your upper basket may be changed using dishes in the upper basket of your the wheels which are mounted at two machine.
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc.
Operating the product 1. On / Off Key 7. Function Selection Keys 2. Menu Key PowerWash Function 3. Time Delay Selection Rapid Clean Function / Menu Direction Selection Keys Super Gloss Function 4. Selection / Confirmation Key Half Load function 5.
Operating the product On/Off Key Preparing the machine 1. Open the door of the dishwasher. When you press the On/Off key, the indicator lights illuminate on the display 2. Place the dishes in accordance for ON position. The lights turn off in with the instructions in the user OFF position.
Page 33
Operating the product /47 EN Dishwasher / User manual...
Operating the product Auxiliary functions Half Load function It is used to operate the machine Washing programmes of your without loading it completely. dishwasher are designed to obtain the 1. Load your dishes in the machine as best cleaning effect, considering the you like.
Page 35
Operating the product Functions in Settings Menu IonActive Function Off/On (depends on the model) Under the settings menu of your product, there are some additional functions that depend on the model. To access these functions, press and hold the Menu key for 3 seconds. Press <- and +>...
Page 36
Operating the product Tablet detergent function (depends on model) Allows to obtain a better drying performance from the multi-purpose detergents called as all in one detergents such as 2in1, 3in1, 4in1, 5in1 and etc., depending on the hardness level of the tap water. If you have used the Tablet features during the last washing programme you...
Operating the product Scheduling the washing time To cancel the Time Delay function Open the door of the product Press Time Delay and hold the Programme Selection If an economical electricity tariff is / Programme Cancel keys for 3 applied in your region, you can use seconds.
Operating the product The machine will remain Rinse Aid indicator ( ) silent in pause mode for Please check the rinse aid indicator some time in order to on the display to see whether there is remove the water from the adequate amount of rinse aid in the machine and on the dishes dishwasher or not.
Operating the product End of programme Water cut-off warning If mains water is cut or water inlet When the programme you tap is turned off the machine cannot have selected comes to an take water in and E:02 icon will flash end, an audible warning on the programme indicator.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if Clean the filters at least once a week it is cleaned at regular intervals. in order for the machine operates efficiently. Check if food residues are Unplug the product and turn left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a Check if the holes on the upper week in order for the machine operates impeller (1) are clogged. If they efficiently. are clogged, remove and clean the Lower impeller impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 44
Troubleshooting Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary.
Page 45
Troubleshooting • Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the supply water appropriately and check the water hardness setting. • Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while adding salt.
Page 46
Troubleshooting they are used for purposes such as opening cans. Do not use metal kitchen utensils out of their intended uses. • Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable; they should not be washed in dishwashers. •...
Page 47
Troubleshooting • Dishes are not placed orderly in the machine. >>> When placing the glasses and other glassware into the basket lean them not against other dishes but the edges or racks of the basket or the glass support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces.