Mitsubishi Electric DX-TL5000E series Operation Manual page 8

Command code table (continued)
RS-232C [Direct operation specification] operation setting command form (4/7)
Command name Command
Clear warning display WC* (1) ≤
Load/save menu data (1) (2)
MC,* **
Initialize menu
MC,00100 ≤
Clear data CL,** (1) **
Eject DVD/CD EJ,** (1) ** (2)
Construct alarm list IFC01,** (1) **
**** (4) ****
** (7) ** (8) **
** (11) ≤
Status
RC ≥
EX,** (2) WC* (1) ,** (3) ≥
(3) RC ≥
** ≤
(4) (1) (2)
EX,** MC,* ** **
(5) (6)
** ** ≥
RC ≥
EX,** (1) MC,00100,** (2)
** (3) ≥
(2) ≤ RC ≥
EX,** (3) CL,** (1) ** (2) ,**
** (3) ≤ RC ≥
(4) (1) (2)
EX,** EJ,** ** **
** (5) ≥
(2) ** (3) RC ≥
(12) (1)
(5) ** (6) EX,** IFC01,** **
(9) ** (10) **** (4) **** (5) ** (6) **
** (8) ** (9) ** (10) ** (11) ,
**** (13) ** (14) ≥
(1)
* :Clearing warning display command
0:Clear
** (2) :Error type (Refer to page 4.)
** (3) :System mode number (Refer to Power command)
* (1) :Menu loading/saving command
(3)
, 1:Load
** (2) :Device to be loaded/saved
02:Copy 1
(3)
** :Device group to be loaded/saved
<For Copy 1>
03:DVD/CD
<For Copy 2>
03:DVD/CD
** (4) :Error type (Refer to page 4.)
** (5) :Data error type
00:No error
20:No data
22:Unavailable data (Unconformable partition setting)
(6)
** :System mode number (Refer to Power command)
** (1) :Error type (Refer to page 4.)
** (2) :Data error type
00:No error
20:No data
22:Unavailable data (Unconformable partition setting)
(3)
** :System mode number (Refer to Power command)
(1)
** :Device including the data to be cleared
(4) ≥
01:Main
** (2) :Device group including the data to be cleared
<For Main>
01:Normal
<For Copy 1>
00:SerialBus
03:DVD/CD
<For Copy 2>
00:SerialBus
03:DVD/CD
** (3) :Error type (Refer to page 4.)
** (4) :Data clearing mode number
00:End
** (1) :Device to be ejected
(3)
, 02:Copy 1
(2)
** :Device group to be ejected
03:DVD/CD
(3)
** :Opening/closing disk tray
00:Close disk tray
** (4) :Error type (Refer to page 4.)
** (5) :DVD/CD ejecting mode number
00:End
** (1) :Alarm list construction device
(2) (3)
**
01:Main
(7) (2)
** :Alarm list construction device group
<For Main>
01:Normal
<For Copy 1>
00:SerialBus
03:DVD/CD
<For Copy 2>
00:SerialBus
03:DVD/CD
(3)
** :Direction
00:Forward direction from specified time
02:Forward direction from end point of previous construction
03:Reverse direction from start point of previous construction
04:Starts construction from start point of the specified device (forward direction)
05:Starts construction from end point of the specified device (reverse direction)
**** (4) :The number of list items
0000-1000
(5)
**** :Sensor to be searched
Shown using hexadecimal number. Bit allocation for each camera
LSB=sensor 1 Ex. "003F" indicates sensor numbers 1 to 6.
** (6) :Specified time/year (01-37)
** (7) :Specified time/month (01-12)
** (8) :Specified time/day (01-31)
** (9) :Specified time/hour (00-23)
(10)
** :Specified time/minute (00-59)
(11)
** :Specified time/second (00-59)
(12)
** :Error type (Refer to page 4.)
**** (13) :The number of items to be constructed
0000-1000
** (14) :Data error type
00:No error
20:No data
8
Note
2:Save
03:Copy 2
04:USB Memory
10:No device 11:No medium
21:Improper data
10:No device 11:No medium
21:Improper data
02:Copy 1 03:Copy 2
02:Alarm 03:LPA
01:NAS 02:SCSI
04:USB Memory
01:NAS 02:SCSI
05:Internal
02:Data clearing error
03:Copy 2
01:Open disk tray
02:Eject error
02:Copy 1 03:Copy 2
02:Alarm 03:LPA
01:NAS 02:SCSI
04:USB Memory
01:NAS 02:SCSI
05:Internal
01:Reverse direction from specified time
10:No device 11:No medium
99:Other errors