Rs-232C Status Condition Change Notification - Mitsubishi Electric DX-TL5000E series Operation Manual

Command code table (continued)
Status condition change notification (1/2)
Mode
Warning notification LOG,****
(7)
** ************
Recording start/end NTFY00,**
notification ** (7) ** (8)
(14) (15)
** **
** (20) ** (21)
************
Status
(1) ** (2) ** (3) ** (4) ** (5) ** (6) ****
(8) 1100:Recording/Full (Normal area)
≥
1101:Recording/Full (Alarm area)
1102:Recording/Full (LPA area)
1200:Recording/Remaining capacity warning (Normal area)
1201:Recording/Remaining capacity warning (Alarm area)
1202:Recording/Remaining capacity warning (LPA area)
13
14
24
3100:Copy/Full (Copy 1)
33
34
4100:Restore/Full (Normal area)
4101:Restore/Full (Alarm area)
4102:Restore/Full (LPA area)
43
44
7100:Copy/Full (Copy 2)
7200:Copy/Remaining capacity warning (Copy 2)
73
74
** (2)
** (3)
(4)
**
** (5)
(6)
**
** (7)
************
000.000.000.000-255.255.255.255
** (1)-(16)
(1) ** (2) ** (3) ** (4) ** (5) ** (6)
** (9) ** (10) ** (11) ** (12) ** (13) 00:Stop mode of recording
(16) (17) (18) (19) 02:Alarm recording from stop mode
** ** ** **
** (22) ** (23) ** (24) 10:Stop of normal recording
(25) 12:Alarm recording from normal recording
≥
20:Stop of alarm recording
22:During alarm recording
30:Stop of emergency recording
32:Alarm recording from emergency recording
** (17)
00:REC/REC STOP button
02:Motion detection
04:Rear terminal (REC, REC/STOP terminal)
<When factor of recording condition change is rear terminal (ALARM IN, EMERGENCY terminal):>
** (18)
00:ALARM IN 1
04:ALARM IN 5
08:ALARM IN 9
12:ALARM IN 13
16:EMERGENCY
<When factor of recording condition change is motion detection:>
** (18)
00:CH1
04:CH5
08:CH9
12:CH13
<Other cases>
(18)
**
** (19)
** (20)
(21)
**
** (22)
(23)
**
** (24)
************
000.000.000.000-255.255.255.255
(1)
:Log number
:Recording operational error
:Abnormal recording operation
:Abnormal playback operation
:Copy 1 operational error
:Abnormal Copy 1 operation
:Restore operational error
:Abnormal restore operation
:Copy 2 operation error
:Abnormal Copy 2 operation
*Following numbers are entered in
00:A (internal) 01:B (internal)
10-25:USB (external) (24:DVD/CD, 25:USB memory)
30-35:SCSI (external)
40-47:NAS (external)
:Year (01-37)
:Month (01-12)
:Day (01-31)
:Hour (00-23)
:Minute (00-59)
:Second (00-59)
(8) :IP address
:Recording condition of camera numbers 1 to 16
:Factor of recording condition change
:Rear terminal number
01:ALARM IN 2
05:ALARM IN 6
09:ALARM IN 10
13:ALARM IN 14
:Motion-detected camera number
01:CH2
05:CH6
09:CH10
13:CH14
:00
:Year (01-37)
:Month (01-12)
:Day (01-31)
:Hour (00-23)
:Minute (00-59)
:Second (00-59)
(25)
:IP address
47
Note
.
02:C (internal)
01:Normal recording from stop mode
03:Emergency recording from stop mode
11:During normal recording
13:Emergency recording from normal recording
21:Normal recording from alarm recording
23:Emergency recording from alarm recording
31:Normal recording from emergency recording
33:During emergency recording
01:Rear terminal (ALARM IN, EMERGENCY terminal)
03:Communication
05:End of alarm/emergency recording time
02:ALARM IN 3 03:ALARM IN 4
06:ALARM IN 7 07:ALARM IN 8
10:ALARM IN 11 11:ALARM IN 12
14:ALARM IN 15 15:ALARM IN 16
02:CH3 03:CH4
06:CH7 07:CH8
10:CH11 11:CH12
14:CH15 15:CH16