Recording Schedule - Edit Sensor Events Settings - Canon K-64 User Manual

Configure Motion and Sensor Settings

Recording Schedule - Edit Sensor Events Settings

You can specify recording settings based on the occurrence of a sensor event. A number
of tabs in the Sensor Event Settings dialog are shown to reflect the number of sensors on
each camera. You can modify the recording settings for each sensor.
Step 1: Next to 'On sensor event', click the Settings... button
Click a tab to modify that
sensor's settings. The
Sensor Name is indicated
below.
Night Mode is available for
VB-C50i/VB-C50iR camera
servers or VC-C50i/VC-C50iR
cameras connected to camera
server VB150, allowing you to
see video in dark conditions.
You can choose to have it
Enabled, Disabled or Not
specified.
External Outputs such as
light switches can be set to
On or Not specified.
Setting Night Mode to 'Enabled' will activate the IR cut filter on
camera servers that support it. It will not turn on the built-in IR light.
Note
76
The Sensor Event Settings dialog
opens.