Canon K-64 User Manual page 54

Using the Add Camera Server Dialog
If you have a Multi-Terminal Module VB-EX50 unit plugged into a
VB-C50i/VB-C50iR and have configured the 'Use External Video
Note
Input', video seen in the Viewer will be taken from cameras
connected to the Multi-Terminal unit. Refer to page 3-7 of the
VB-C50i/VB-C50iR User's Manual.
Step 3: Select the Storage Server for recording
Note
Step 4: Select the input state for the camera server
54
Setting a value for the Storage Server does not mean that video
will be automatically recorded. Please refer to the next chapter
for information on setting recording schedules.
There is a maximum number of 64 camera servers that can be
registered on one Storage Server with VK-64 (or 16 cameras
with Network Video Recorder VK-16 v1.1).
Select a Storage Server from the
1
drop-down menu
pre-configured Storage Servers and
enter the Host Name or IP address
and Port number.
If you do not wish the camera
2
server to be recorded, select the Do
Not Record
drop-down menu.
In the Camera Server Settings field, one
or more Input boxes may display,
depending on the camera server setup. If
a sensor input is received, you can swap
its value from 'on' to 'off' (with respect to
the operation of schedules) by ticking the
Input box. This acts as a 'toggle' control.
which lists
option from the