About Shade Correction - Canon K-64 User Manual

Other Video Window Functions
Click Close Window to close the Video Window that is currently selected. You can
also close a selected Video Window by pressing the Delete key.
Note

About Shade Correction

Shade Correction compensates for images consisting of lighter regions and darker regions.
A 'balance' is achieved by increasing the brightness of shaded regions without adversely
affecting the existing lighter regions (unlike Backlight Compensation).
Shade correction Off
112
Click Admin Viewer to activate the Webview Livescope Admin Viewer if
it is installed and you are running VK-64 in Administrator mode. Using
the Admin Viewer, you can send audio to the VB-C50i or VB-C50iR
if it is configured to enable the audio function. Refer to your
VB-C50i/VB-C50iR User's Manual for more information on the settings.
It is recommended you install the Admin Viewer in advance.
Shade Correction cannot be applied to multiple Video Windows.
If you enable it on a Video Window, it will be removed from any
other Video Window.
Shade correction is performed by using image processing
within the Viewer and not on the Camera Server. It can be used
on live or recorded video (see below).
Shade Correction High
Darker regions are most affected by Shade Correction.
Click Shade Correction to correct shaded
areas in the Video Window. This affects the
individual Video Window on display, i.e.,
any duplicate (unselected) windows are not
affected. Shade Correction is discussed below.
Unlike Backlight Compensation
(a feature installed on cameras)
Shade Correction does not
affect
Correction only applies to the
displayed Video Window in the
Viewer.
the camera itself.