Product View; Battery Door; Getting To Know Your Thermostat - Pro1 IAQ T701 Operating Manual
Hide thumbs
Also See for T701:
- Installation manual (11 pages) ,
- Operating manual (4 pages) ,
- Operation manual (6 pages)
Advertisement
Getting to know your thermostat
1
3
2
Glow in the Dark Light Button
3
Fan Switch
4
System Switch
5
Easy Change Battery Door
Temperature
6
Battery door information
Use the finger bevel on
the lower portion of the
side of the thermostat to
open the easy access
battery door.
THERMOSTAT QUICK REFERENCE
2
6
4
5
Setpoint Buttons
Replace with 2 AA
Alkaline batteries.
1
LCD
Low Battery Indicator:
Replace batteries when
indicator is shown.
Indicates the current
room temperature.
Important:
The low battery indicator is displayed
when the AA battery power is low. If
the user fails to replace the battery
within 21 days, the thermostat
display will only show the low battery
indicator as a final warning before the
thermostat becomes inoperable.
Simple operating instructions are
found on the back of the battery door.
Displays the user selectable
setpoint temperature.
System operation indicators:
The COOL, HEAT or FAN
icon will display when the
COOL, HEAT or FAN is on.
NOTE: The compressor
delay feature is active if
these icons are flashing.
The compressor will not turn
on until the 5 minute delay
has elapsed.
2
- Quick Links:
- Product View
- Battery Door
Hide quick links:
Advertisement
Need help?
Do you have a question about the T701 and is the answer not in the manual?
Questions and answers
What causes the "Cool ON" icon to comes on and flash steadily and the system turns off?
The "Cool ON" icon flashes steadily, and the system turns off on a Pro1 IAQ T701 thermostat due to a compressor delay feature. This is a normal function to protect the system from damage, and the delay will last for approximately 5 minutes.
This answer is automatically generated
What causes the temp nature not to change when heat is switched on
The temperature setting may not change on the Pro1 IAQ T701 when the heat is switched on if the batteries are low. If the battery icon appears, replace the AA batteries immediately, as failure to do so may result in the heating and cooling system becoming inoperable.
This answer is automatically generated
Temp at use does change when heat is switched on when temp was set to be 78 it stays at 70
The Pro1 IAQ T701 thermostat may display a temperature of 70 instead of 78 after the heat is switched on because the display shows the current room temperature, not the setpoint temperature. When the heat is turned on, the thermostat will gradually warm the room until it reaches the set temperature of 78. The display will update as the room temperature increases.
This answer is automatically generated
How do I get the batteries out to change them?????
To change the batteries in the Pro1 IAQ T701 thermostat, follow these steps:
1. Locate the battery door on the thermostat.
2. Open the battery door to access the battery compartment.
3. Remove the old AA batteries.
4. Insert two new AA alkaline batteries, ensuring correct polarity.
5. Close the battery door.
Replace the batteries immediately when the battery icon appears to avoid system inoperability.
This answer is automatically generated
LO on main screen where room temperture would be displayed