Number Pad; External Device Selectors; Universal Controller - Samsung SCC-3100A User Manual

Names and Functions of Each Part

2. Number Pad

0 ~ 9 : Used for entering camera ID, channel number,
monitor number, DVR ID, etc. (see p.26).
MONITOR : Select a monitor for matrix output
CAMERA : Enter camera number and press the CAMERA
button to set the camera ID (PTZ mode) or set the
channel (DVR mode).
SPD-3300 SPD-3000 SPD-2300 SPD-2500
TRACE RUN TRACE RUN TRACE RUN TRACE RUN
F+1
TRACE TRACE TRACE TRACE
F+2
MEMORY MEMORY MEMORY MEMORY
TRACE TRACE TRACE TRACE
F+3
MEMORY STOP MEMORY STOP MEMORY STOP MEMORY STOP
AUTO POWER AUTO POWER AUTO POWER AUTO POWER
F+4
ON ON ON ON
AUTO POWER AUTO POWER AUTO POWER AUTO POWER
F+5
OFF OFF OFF OFF
F+6 SRX-100B POWER ON
SRX-100B POWER OFF
F+7
Caution
• When using functions that are performed by a combination of the function
button and numeric keys, the setup may be different depending on the camera
manufacturer.
• Use the AUTO POWER ON setting to allow the camera to resume the tasks in its
memory upon power supply, even if they were previously aborted as a result of
power failure, etc.
• BOSCH's function is not used.
SYSTEM CONTROLLER 12
SAMSUNG
PANASONIC
SPD-2200 SPD-1600 PELCO-D
ELECTRONICS
(WV-CS854A)
(SCC-643/641)
TRACE RUN TRACE RUN TRACE RUN
TRACE RUN TRACE RUN
(PATTERN) (PATTERN) (PATTERN 1)
TRACE TRACE F2 TRACE RUN
MEMORY MEMORY (SPECIAL 2)
(PATTERN 2)
TRACE TRACE
TRACE RUN
F3
MEMORY STOP MEMORY STOP (PATTERN 3)
AUTO POWER AUTO POWER
AUTO-SORT
ON ON
AUTO POWER AUTO POWER
OFF OFF
PELCO-P protocol's function button is same as PELCO-D protocol.
User's Manual
Names and Functions of Each Part

3.External Device Selectors

PTZ : Selects the PTZ mode (see p.20~29).
MATRIX : Selects the MATRIX mode(see p. 40~44)
DVR : Selects the DVR mode(see p. 30)
SETUP : Activates the system setup menu(see p. 27)

4. Universal Controller

ZOOM W/T : Performs camera zoom action (wide and
telephoto).
FOCUS -/+ : Used for manual focus adjustment.
: Used for moving the menu cursor up (when menu
is active), pausing DVR playback, or playing stills.
: Used for moving the menu cursor down (when
menu is active) or stopping DVR playback.
: Used for moving the menu cursor left (when
menu is active) or playing recorded video in the reverse direction.
: Used for moving the menu cursor right (when menu is active) or Fast Playback.
: Used for playing recorded video.
ESC : canceling entered values, or moving to the previous stage.
ENTER : Used for executing the entered values and performing setups (PTZ mode and DVR mode)
Note
• 4-way button and Esc/Enter button are used to control Speed-Dome OSD menu
of the SPD-3000/2300 version 2.04 and SPD-3000 version 6.4.
• The ESC/ENTER button is used for IRIS control of types of BOSCH.
SYSTEM CONTROLLER 13 User's Manual