Matrix Mode (Smx-25632); Selection Of Camera And Monitor; Joystick For Camera Controls; Auto Select - Samsung SCC-3100A User Manual

MATRIX Mode
MATRIX is another name for SAMSUNG SMX-25632.

1. Selection of Camera and Monitor

This is a manual function to display the cameras connected to the MATRIX SYSTEM on the monitor.
Select Monitor : Select a monitor number between 1 and 32. Press MONITOR.
Select Camera : Select a camera number between 1 and 255. Press CAMERA.
• Monitor must be selected before the camera. Default is 1, and up to 255 cameras can be
selected by connecting up to 3 input MATRIX extensions.
2. Joystick for Basic Camera Controls
JOYSTICK : Used for moving the PAN/TILT up/down/left/right/diagonal.
ZOOM : Use the TELE button for Telephoto view
(Turn the TELE button or the Joystick clockwise for Telephoto view)
Use the WIDE button for WIDE view
(turn the WIDE button or the Joystick counterclockwise for WIDE view)
FOCUS : + button to focus away
- button to focus closer

3. AUTO SELECT

3-1. AUTO SELECT Setup

This is a function to select cameras to be displayed on the monitor in AUTO RUN.
From the initial screen, press the MATRIX button and
then press the MENU button to display the [MATRIX
CONTROL] menu.
Press button 1 to display the [AUTO SELECT SET]
menu. (In MATRIX, wait for data loading completion.)
Select a number between 1 and 32, and then press the
ENTER button to select the corresponding monitor.
SYSTEM CONTROLLER 40 User's Manual
Select a number between 1 and 255, and then press
the CAMERA button to select the corresponding
camera.
Select a number between 1 and 60, and then press
the ENTER button to select the corresponding HOLD
TIME.
3-2 Cancel AUTO SELECT
This is a function to cancel AUTO RUN
Press the MENU button, and then press the 1 button.
(In MATRIX, wait for data loading completion.)
Press the ESC or the SET button to exit the
corresponding setting.
3-3. Delete AUTO SELECT
This is a function to delete each AUTO RUN setting.
Press the MENU button, and then press button 2.
Select a number between 1 and 32, and then press
the ENTER button to select the monitor to be
canceled.
3-4. AUTO SELECT RUN/HOLD
Press the AUX2 button to RUN all MATRIX channels.
Press the AUX3 button to HOLD all MATRIX channels.
Select a number between 1 and 32, and then press the AUX2 button to RUN the
corresponding MATRIX channel.
Select a number between 1 and 32, and then press the AUX3 button to HOLD the
corresponding MATRIX channel.
SYSTEM CONTROLLER 41
MATRIX Mode
User's Manual