Table of Contents
Advertisement
Available languages
Available languages
System Overview
5. General Connection
PTZ
Dome Camera
Junction Box
Junction Box
Master Controller
Sub-Controller
(a maximum of 15
connections allowed)
• SVR-1630 cannot use general connection.
6. Connection Through SVR-1650/1640/950/440
Junction Box
Junction Box
Master Controller
Sub-Controller
(a maximum of 15
connections allowed)
SYSTEM CONTROLLER
10
DVR
Dome Camera + DVR: 255 max.
CCD Camera
Remarks
: Controller Connection Cable
: RS-485/422
: Video Cable
PTZ
Dome Camera
SVR-1650/1640/950/440 : 255 max.
PTZ
Dome Camera
User's Manual
Names and Functions of Each Part
1.Camera Setup Section
RESET
: Resets camera power.
PRESET
: Moves camera to the preset location (see p.21).
SWING
: Continuously travels between two assigned locations
horizontally (pan) or vertically (tilt) (see p.22).
AUX 1
: Toggles the camera's external device AUX1 on and off.
GROUP
: Repeats sequential surveillance of assigned preset locations
with preset movement rates and intervals (see p.23).
AUX 2
: Toggles the camera's external device AUX2 on and off.
TOUR
: Sets more than 1 group for tour and performs
continuous group action (see p.24).
AUX 3
: Toggles the lights around the camera on and off.
AF
: Sets the focus to automatic or manual after operating
the camera (see p.28).
OSD
: Displays the camera OSD menu (see p. 29).
FUNCTION: Used to perform 2 functions or more at the same time (see p.12).
Buttons supported by different manufacturers
SPD-3300
SPD-3000
SPD-2300
SPD-2500
SPD-2200
RESET
O
O
O
O
O
PRESET
O
O
O
O
O
TOUR
O
O
O
O
O
SWING
O
O
O
O
O
GROUP
O
O
O
O
O
AF
O
O
O
O
O
OSD
O
O
O
O
O
AUX 1
Applies only to systems with AUX 1 terminals. (SRX-100B only)
AUX 2
Applies only to systems with AUX 2 terminals. (SRX-100B only)
Applies only to systems with housing and receivers that support the light function. (SRX-100B only)
AUX 3
PELCO-P protocol supports only the functions of Preset, Reset, OSD, Swing(Auto-Pan) only.
Caution
• Some buttons in the camera setup section may not be supported or may be
used differently depending on the camera manufacturer.
SYSTEM CONTROLLER
SAMSUNG
PANASONIC
BOSCH
SPD-1600
PELCO-D
ELECTRONICS
(SCC-643/641)
(WV-CS854A)
(G3A series)
X
O
O
O
X
O
O
O
O
O
X
O
X
X
X
O
X
O(AUTO-PAN)
X
O(SCAN)
O
X
O(AUTO-PAN)
X
O
O
O
O
X
O
O
O
O
O
11
User's Manual
- Quick Links:
- Connecting Controller and Junction Box
Hide quick links:
Advertisement
Chapters
Table of Contents
