Installing The Side Trim Strips - Blomberg DW 24100 B Installation Manual

A
T20
B
Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to
the enclosure height.
Adjust the rear foot level with a screwdriver
to balance and raise the dishwasher to the
enclosure height.
Notice :
Make sure the dishwasher is plumb and
•
notice dishwasher can be placed with a small
clearance under the counter top.
Turning the screwdriver in the direction of the
•
black arrows will bring the dishwasher back
feet up.
Turning the screwdriver in the direction of the
•
white arrows will take the dishwasher rear
feet down.
6.4 INSTALLING THE SIDE TRIM
STRIPS
1. Remove the adhesive tape (Figure A).
Place the trim strips on the front edge of the
side walls (Figure B).
Notice :
Make sure you use the correct trim strip
•
since there is a left and right side strip. The
flexible material should be facing forward
(Figure B).
8
USA