Specifications
HP NC375T PCI Express Quad Port Gigabit Server
Adapter specifications
Specification
Network controller chipsets
Bus type
Bus width
On-board memory
Data transfer method
Boot ROM support
Management capabilities
Power requirement
Data transmission rate
Standards supported
Dimensions
Connector and distances
Interrupts supported
Temperature range
Relative humidity (non-
condensing)
Safety compliance
Value
Netxen NX3031
x4 PCI-Express v2.0 & v1.1
Four lanes
128MB for PCA
Bus Master DMA
Yes
PXE 2.2, ACPI 1.1a, ASF 2.0
14W @ 3.3V Max
12.5W @3.3V Typical
11.5W @ 3.3V Idle
10 Full/10 Half, 100 Full/100 Half, 1000 Full
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x (flow control), IEEE
802.3ad (link aggregation), IEEE 802.1p (QoS), IEEE 802.1q (VLAN tagging),
IEEE802.3z
16.76 cm x 6.86 cm [6.6 in x 2.7 in (L x W)] (without bracket)
10BASE-T: Category 3, 4, or 5 UTP 100 m (328 ft)
100BASE-TX: CAT5 UTP 100 m (328 ft)
1000BASE-TX: CAT5 UTP 100 m (328 ft)
Automatically configured
Operating: 0°C to 55°C (32°F to 131°F)
Storage: -65°C to 85°C (-85°F to 185°F)
Operating: 10% to 90%
Storage: 5% to 95%
UL Mark (US and Canada)
CE Mark
EN 60590
RoHS (European Union)
Specifications 10
Need help?
Do you have a question about the NC375T and is the answer not in the manual?
Questions and answers