HP Vectra VL6 6 Installation Manual
Pci network interface card
Hide thumbs
Also See for Vectra VL6 6:
- User manual (112 pages) ,
- Technical reference manual (78 pages) ,
- Supplementary manual (21 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for HP Vectra VL6 6
Summary of Contents for HP Vectra VL6 6
- Page 1 Etherlink XL PCI Network Interface Card 3C900 Installation Guide...
- Page 2 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C900 adapter card into a PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 4 1 Connecting to a Netware 3.12 Server Windows for Workgroups 7 Execute INSTALL.EXE and set lines 1-5 as listed below; • C:\NWCLIENT • YES • YES C:\WINDOWS • NO • 3COM Etherlink XL/Fast Etherlink XL Family. 8 Highlight option 6 to continue with installation. 9 When prompted, insert the corresponding disks to complete file transfer and driver installation.
- Page 5 • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1. • File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C:\Masters\Win95\System\Cabs\) • Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
- Page 6 C:\Masters\Win95\System\Cabs\) 20 When prompted, insert the 3C900 driver’s disk 2 of 2 and click on “OK.” 21 Set the path to “A:\” and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\3C900\Disk2\”) 22 Click on “YES” to complete installation and restart the machine.
- Page 7 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C900 adapter card into a PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 8 2 Connecting to a Netware 4.11 Server Windows for Workgroups 7 Execute INSTALL.EXE and set lines 1-5 as listed below; • C:\NWCLIENT • YES • YES C:\WINDOWS • NO • 3COM Etherlink XL/Fast Etherlink XL Family. 8 Highlight option 6 to continue with installation. 9 When prompted, insert the corresponding disks to complete file transfer and driver installation.
- Page 9 • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1. • File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C:\Masters\Win95\System\Cabs\) • Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
- Page 10 C:\Masters\Win95\System\Cabs\) 20 When prompted, insert the 3C900 driver’s disk 2 of 2 and click on “OK.” 21 Set the path to “A:\” and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\3C900\Disk2\”) 22 Click on “YES” to complete installation and restart the machine.
- Page 11 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C900 card. 3 After booting, insert the 3COM’s drivers disk “Etherlink 3C900 Ethernet ver.
- Page 12 12 Type the path “A:\WFW311\” in the “Install Driver” dialog box then insert the 3COM 3C900 drivers disk 1 into the floppy drive, and click “OK.” (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C900\DISK1\WFW311”) 13 Select “3Com Fast Etherlink XL / Etherlink XL Adapter (3C90X)” in the “Unlisted or Updated Network Adapter”...
- Page 13 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into an PCI slot. 2 Connect network Cable media to the 3COM 3C900 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 14 “C:\MASTERS\WIN95\SYSTEM\CABS\”) 24 Click on “OK” in the “Please insert the 3Com drivers disk 2” dialog box. 25 Set the path to “A:\” and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\3C900\DISK2\”) 26 Click on “Yes” button to finish the Setup installation and restart your...
- Page 15 3 Connecting to a Windows NT Server 3.51 Windows 95 SR2...
- Page 16 3 Connecting to a Windows NT Server 3.51 Windows 95 SR2...
- Page 17 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C900 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 18 16 Set the path to “A:\” in the “Insert Disk” dialog box, and then insert the 3COM 3C900 drivers disk 1. 17 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C900\DISK1\) 18 Select “3Com Fast Etherlink XL Adapter (3C900)”...
- Page 19 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator) 27 To complete the installation, remove the floppy disk, and click on “Restart Computer”...
- Page 20 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51...
- Page 21 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 PCI adapter card into a PCI slot. 2 Connect network media to the 3COM 3C900 PCI card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 22 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.”...
- Page 23 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue. (If you do not have the required information, contact your network administrator) 27 At the “Show Bindings for:”...
- Page 24 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0...
- Page 25 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C900 card. 3 After booting, insert the 3COM’s drivers disk “Etherlink 3C900 Ethernet ver.
- Page 26 12 Type the path “A:\WFW311\” in the “Install Driver” dialog box then insert the 3COM 3C900 drivers disk 1 into the floppy drive, and click “OK.” (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C900\DISK1\WFW311”) 13 Select “3Com Fast Etherlink XL / Etherlink XL Adapter (3C90X)” in the “Unlisted or Updated Network Adapter”...
- Page 27 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into an PCI slot. 2 Connect network Cable media to the 3COM 3C900 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 28 “C:\MASTERS\WIN95\SYSTEM\CABS\”) 24 Click on “OK” in the “Please insert the 3Com drivers disk 2” dialog box. 25 Set the path to “A:\” and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\3C900\DISK2\”) 26 Click on “Yes” button to finish the Setup installation and restart your...
- Page 29 4 Connecting to a Windows NT Server 4.0 Windows 95 SR2...
- Page 30 4 Connecting to a Windows NT Server 4.0 Windows 95 SR2...
- Page 31 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C900 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 32 16 Set the path to “A:\” in the “Insert Disk” dialog box, and then insert the 3COM 3C900 drivers disk 1. 17 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C900\DISK1\) 18 Select “3Com Fast Etherlink XL Adapter (3C900)”...
- Page 33 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 25 Set your IP address information in the “TCP/IP Configuration” dialog box, and click “OK”. (If you do not have the required TCP/IP Settings, contact your network administrator) 26 At the “Domain/Workgroup Settings”...
- Page 34 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51...
- Page 35 • Interrupt Request Level 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C900 PCI adapter card into a PCI slot. 2 Connect network media to the 3COM 3C900 PCI card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 36 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.”...
- Page 37 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue. (If you do not have the required information, contact your network administrator) 27 At the “Show Bindings for:”...
- Page 38 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0...
- Page 40 Version Number 3C900 Rev.1...