Page 2
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY. YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS user guide Thank you for choosing a Cosatto product. Please take a little time to read the important safety notes detailed below. This will ensure many years of happy, safe use. The instruction manual should be kept safely with child car seat for its life period: safety: take note WARNING: A CHILDS SAFETY IS YOUR RESPONSIBILITY...
Page 3
WARNING: DO NOT use the child car seat in the home. It has not • been designed for home use and should only be used in your car. • The child car seat must always be placed in a forward facing position. •...
Page 4
”Semi-universal” fit in conjunction with 3 point safety belt with ISOfit system 1. When fitted with 3 point safety belt & ISOfit system, this is a “Semi-universal” child restraint. It is approved to Regulation No. 44-04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats with ISOfix attachment points as specied in vehicle type list.
operation: 1 - getting to know your child car seat 1. Backrest cover 6. ISOfix leg 11. Headrest adjuster lever 2. Headrest 7. ISOfix adjustment button 12. Vehicle seat belt guide 3. Side support 8. Seat cover (diagonal belt) 4. ISOfix adaptor 9.
Page 6
Some vehicle manufacturers pre-fit ISOfix guides to the rear seat. If your vehicle is not fitted with ISOfix guides you will need to fit the ISOfix guides supplied with this child car seat. To fit the ISOfix guides first locate the ISOfix hoops (a) which can found between the bottom of the backrest and the vehicle seat.
Page 7
Fit the vehicle seat belt around the child and fasten the buckle. The diagonal and lap belts should fit in the belt guide under the arm rest. Fasten the vehicle seat belt (f). 10 - removing the child car seat Release the vehicle seat belt and remove the impact shield (if fitted).
Page 8
14 - removing the covers for cleaning - backrest Starting on one side carefully pull the cover off (a & b). Release the clips (c) on both sides at (d, e & f). Release the elastic loops at the bottom of the backrest cover on each side (g). The backrest cover can now be removed from the backrest.
Page 9
care Your child car seat has been designed to meet safety standards and with correct use and maintenance will give many years of trouble free performance. Storing a damp child car seat will encourage mildew to form. After exposure to damp conditions, dry off with a soft cloth and allow to dry thoroughly before storing.
Page 10
vehicle list for ISOfix child restraint systems Under standard ECE R44/04 they can be used with all vehicles fitted with an ISOfix fastening system. The seat can be installed on all vehicle seats fitted with an ISOfix system (consult your vehicle manual) regardless of the category of the child seat and the ISOfix group.
replacement parts The replacement parts shown below are available for your product. In the event that you require any of these parts, please contact your local distributor. For the contact information for your local distributor please refer to http://www.cosatto.com/stockists If you are a UK or Ireland customer, please contact us at spares@cosatto.com Backrest cover ISOfix adaptor Seat cover...
Page 19
non ISOfit installation - child car seat location...
Page 31
SIGN UP SIGN UP log onto cosatto.com/3towin join the conversation... @Cosatto_Tweets follow us on... facebook.com/clubcosatto...
Need help?
Do you have a question about the Troop Nitty Gritty and is the answer not in the manual?
Questions and answers