Adjusting Loudness; Using The Subwoofer Output - Pioneer SPH-DA210 Operation Manual

Customizing preferences
Adjusting the 5-band graphic equalizer
You can adjust the level of each band for the
equalizer curves.
❐ A separate "Custom1" curve can be creat-
ed for each source. If you make adjust-
ments when a curve other than "Custom2"
is selected, the equalizer curve settings will
be recorded in "Custom1".
❐ A "Custom2" curve that is common for all
sources can be created. If you make adjust-
ments when the "Custom2" curve is se-
lected, the "Custom2" curve will be updat-
ed.
1 Display the "Audio" screen.
Ü For details, refer to Customizing the audio
settings on page 59.
2 Tap [Graphic EQ].
3 Tap one of the keys to select a curve
that you want to use as the basis of cus-
tomizing.
4 Tap the frequency that you want to ad-
just the level for.
You can select the following frequencies:
100Hz — 315Hz — 1.25kHz — 3.15kHz —
8kHz
5 Tap the screen to adjust the level of the
equalizer band.
You can adjust the equalizer band level be-
tween "+12dB" and "–12dB".

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Display the "Audio" screen.
Ü For details, refer to Customizing the audio
settings on page 59.
2 Tap or next to "Loudness".
Each time you tap
ed in the following order:
Off (default) — Low — Mid — High

Using the subwoofer output

This product is equipped with a subwoofer
output that can be turned on or off.
❐ The cut-off frequency and output level can
be adjusted when the subwoofer output is
on.
1 Display the "Audio" screen.
Ü For details, refer to Customizing the audio
settings on page 59.
2 Tap [Subwoofer].
The "Subwoofer" screen appears.
3 Tap [Subwoofer] to set to "On".
The subwoofer output is turned on.
If you select "Off", the subwoofer output is
■
turned off.
4 Tap [Phase] to select "Normal" or
"Reverse" to set the phase of subwoofer
output.
or the level is select-
,
En
Chapter
14
61